TARKOVSKY FIELD GUIDEOpen studio →

FIELD GUIDE · VIEWFINDER

The Viewfinder:
frame it in 3D.

The Viewfinder is a 3D view of the scene, built from its floor plan. Put the camera where it stands, type the lens, see what it frames and where the line is, and Frame it hands that framing to the shot. The readout says what a crew would say: the size, the height, the tilt, the lens and where the camera faces.

06a / VIEWFINDER

Frame each shot in 3D, from the floor plan.

Viewfinder in 0.72: a new shot starts people as the scene left them

  • People keep the scene's postures. In Frame it, someone the frame's words don't pose starts as the shots before it in the scene left them: seated in the scene's first two shots, seated in a third one you just added. Where they stand already carried. Sitting, kneeling, lying, crouching and leaning carry; standing up, walking or running ends it.
  • The frame's words win. A frame that says how someone is posed decides for them.

Floor plans in 0.72: coming into the frame, the sky by the time of day, one light once

  • Someone who comes into the frame at its side starts at that edge of the plan. Words such as enters at frame right, comes into frame or into shot start their mark at the plan's edge on that side of the frame, never behind a door. Leaves frame left ends it at that edge. Only words that name a door or a room, such as comes in through the door or enters the shop, take them through a door. Inside a room, comes in still means its door.
  • A sun at night, or a moon by day, is left out of the light. When a scene's plan has the sun on and the scene is at night, a still or a take is not told about the sun, and the plan's notes say so: The sun is on in this plan, but scene 1 is at night… Turn it off, or put the moon in its place. Dawn and dusk keep the low sun.
  • Two lights in one place are named once. When two lights' names end in the same word, such as Green neon and green neon sign, and they stand within a meter, the plan's draft adds only one, and the plan's notes name a pair already there: If they are one light, delete one. Two lamps on one desk with different names, such as the desk lamp and the reading lamp, stay two.

Viewfinder and Directing in 0.71.2: the strip is called Preview

  • Preview is the strip of pictures under the view, and Directing's top lane: a free preview of the gray clip, one picture a second, not key frames. While it draws it says Drawing the preview…; when it can't, The preview couldn't be drawn here.

Viewfinder in 0.68.4: keep moving, answer once, and Moves go

  • "Where should this go?" no longer stops you. After you move or turn someone, the window waits over the view, on the side away from them. Keep moving the same person: drag them, turn their dot, or press the arrow keys. It all becomes one question, and the window says You can keep moving Emina, then answer once.
  • Cancel still puts them back where the first move began. Esc closes a pop-up or leaves a box you're typing in first; then it's Cancel.
  • One person at a time. While the window asks about one person, moving someone else waits, and so does a raise. If you open another shot or frame while it asks, the move is put back, and a note says so.
  • Moves go, on Frame it's toolbar, says where moves go without the window: Ask each time (as before), The whole scene, or Only this shot (cheat). Choose whether it's for the open shot or every shot in the scene. When it answers for you, the button shows its choice in the shot's color. It lasts until you close the tab, and each move it answers has its own Undo.
  • Or tick the box in the window: Do this for every move in 1A until I change it, then pick The whole scene or Only in 1A. Moves in 1A then go there without asking. Change it back under Moves go.
  • Moves go never answers a move that would change another shot with a take. The window asks then, so you see the take first. It never makes a new shot, and a move in a shot's last frame stays that shot's action, as before.
  • Moving people is free. The whole scene still names the stills it puts out of date, and nothing is made or charged until you press for it.

Viewfinder in 0.68.3: the sketch with every still, and a full frame

  • The sketch sent is always the pencil sketch with names, whatever Frame it shows. The line under the view says so: Pencil shows the sketch sent with the frame's stills.
  • A full frame asks first. When a frame already has as many pictures as its still's model takes, Make asks before anything is made. Leave out the sketch, or one picture, or switch the still to a model that takes them all. Each choice says what it does. Nothing is picked for you. Make the still shows the price of your choice, and Cancel makes nothing. This happens on the Shot List, the Storyboard and New shot. Tarkovsky Director and agents aren't asked: their still goes without the sketch.
  • A name the sketch can't draw is left off whole, so the figure follows the shot's words. That's a name with letters of another script, a symbol, or more than 40 characters. Letters such as ø and ß are spelled out (Soren, Strasse).

Viewfinder in 0.68.1: Ask or direct, docked under the plan

  • Ask or direct is docked under the plan. It talks about the open shot only: say what the shot should do (frames and moves, a look, a pause, a line said another way), see what it costs, and send. Each change comes back as a card; nothing changes until you accept, and Undo is on the card and in History.
  • After Accept, the tabs, the strip and the view show the new frames at once, and the camera is placed again from them. A framing you made by hand stays as it is, and the card says which.
  • A different camera move on a shot with stills or takes offers Change 1B's move or Make a new shot, 1B.1. 1B.1 comes right after 1B with its own frames and stills, and 1B stays as it is.

Viewfinder in 0.68: the strip of frames, Key frame 2's own tab, and the words under the view

  • The strip. Under the view there is a strip of gray frames, one per second (one per 2 s past 10 s), with First frame, Key frame 2 and Last frame marked and the shot's parts under it. Click one of the shot's frames to open it; click any other to see that moment. Play blockout runs along it. Free.
  • Key frame 2 (and Key frame 3, …) has a tab between First frame and Last frame. Move the camera or change the lens there to set where the shot is at that moment; the gray clip follows. Undo is in History and ⌘Z. Posture, head and eyes are set on First frame or Last frame: Key frame 2 shows them as First frame has them.
  • The camera's words are under the view now, and Prompt lines is at the right of that line. The Sketch box is gone from Frame it; the sketch itself is still made, and still goes with a first or last frame's still.
  • Drag the bar between the view and the strip to give either more room; a double-click puts it back.

Viewfinder in 0.68: someone added after the floor plan, and a last frame's posture

  • Someone added to a scene after its floor plan was saved, or someone a shot chose (picked in its Who, or with a sheet attached to one of its frames), shows on the plan and among the people, where the studio places them, and is saved on the plan with your first change there. Someone only named in a shot's words doesn't, yet. The Shot List's plan window places only the people tagged in the scene: tag them there to keep them in both.
  • Moving someone in a shot's last frame keeps the posture and eyes that frame had (0.67 stood them up with their eyes on the camera), and the sketch that goes with that frame's still shows them so. Each shot still works out sit, stand and where someone looks from its own words; carrying them from shot to shot is still to come.

Viewfinder in 0.66: Reply on a move's end, and the camera in a take's prompt

  • Reply asks the studio about the end, or pushes back (why there?, can it end on the window instead?). Its hover: Ask the studio about this end, or push back. Nothing changes until you accept. Type your question in its box (Ask why, or say what you'd like instead); the button shows its price before you send it (Send · about 0.7 credits). The answer shows under the Move line. When it proposes another end you get Accept, Edit and Reply; when it only explains, Reply alone. Nothing changes until you accept. If the studio's answer can't be read, nothing is charged; ask again.
  • Where there is no Reply. A hold, a last frame of your own, and a shot whose camera is written in stretches have Accept and Edit, and no Reply yet.
  • The camera in a take's prompt, a stretch at a time. On models told the camera in timed lines, a stretch the studio can read for certain is one line in a set form. A hold reads 0–2 s: the camera holds still on a medium shot of Emina. A pan from one person to another reads 2–4 s: the camera pans right (slowly), from a medium shot of Emina to a medium shot of Zibelda, ending on: Zibelda at the counter, in focus. To get these, write the camera a stretch at a time in the shot's how, each a hold or one move with where it ends: 0–2 s: holds on Emina; 2–4 s: pans right slowly to Zibelda at the counter; 4–5 s: holds on Zibelda. Anything written another way goes to the model in your own words, as before.
  • A person's arrow is their path here too: Frame it's hover and History say Emina's path.

Viewfinder in 0.65: a move's end, stretch by stretch

  • A move's end, stretch by stretch. A shot's camera can do several things: hold, then pan; pan, then hold; pan, hold, then tilt. Each part of the shot, and each timed camera line in it ("0–2 s: holds; 2–4 s: pans right to Zibelda"), is a stretch. Frame it's Move line names every stretch: a hold says holds, a move says where it ends. A move ends on the frame where the next stretch begins, else where its words say, else the studio recommends an end, which you can Accept (it becomes that stretch's end, one line in History with Undo) or Edit (say it in your words). The blockout holds each hold and moves each move to its end.
  • A take asks about every end that's only recommended, a move's inside the shot too, before anything is held. Generate anyway accepts them first, as yours, and a Tarkovsky Director run accepts them itself.

Viewfinder in 0.64: Frame it moves a piece, and where a move ends

  • Move and turn pieces here. On the Viewfinder's plan, drag a piece of furniture to move it, or click it and drag its dot to turn it. It moves or turns in every shot of the room, with Undo: The counter moved in every shot of this room. The notice names the stills and backgrounds now made from the earlier plan. On an OK'd plan it asks first. Here a piece stays in its own room. To resize it, or to change a door or a window, use Floor plan: the plan is changed in Assets, so every shot reads the same one.
  • Where a move ends. A move ends on the shot's last frame. With no last frame, it ends where its words say it goes or what it follows (pans to Zibelda, tilts down to her hands, zooms in to an MS, cranes up to the room around her, follows Emina). With neither, the studio recommends an end from the people and things in view, and only uses its usual distances (a 45° pan, a 20° tilt, a 1.2 m crane, a 1.6× zoom) when nothing is there.
  • Accept, Edit or Reply. The Move line shows the recommendation (Move: pan right 33°, ending on Zibelda · the studio's recommendation, from who's in view), and the plan shows it as a dotted wedge, end?. Accept makes it the end, one line in History with Undo. Edit: choose someone or something in view, or say it in your words (to the shop window), and the end follows them; its list also has Frame it yourself, a last frame that starts at the studio's end. Reply asks the studio about the end, a question a model answers, priced on its button before you send it (since 0.66; the section above has it).
  • One end everywhere. What you accept is the end: the blockout, the Move line and the take's words all end there, the focus with it. Change the move or its words, move the first frame, or take away what it ends on, and the end is read again from the words, or recommended again.
  • A take asks first. Generate a take before an end is settled and the free check shows a red flag, before anything is held. Generate anyway accepts the studio's end first, as yours. A Tarkovsky Director run accepts the recommendation itself and says so in its log.

Viewfinder in 0.64: height follows what they stand on, floating, the arrows and Esc

  • A dais, a platform or steps is a piece of the floor plan: in Assets' floor plan, Add › Furniture. Its panel has its Height and, for steps, How many steps. Anyone on it stands at that height in every shot of the scene, and someone who steps off it in a later shot is back on the floor. On steps they stand at their step. Steps climb from the piece's front to its back: use Turn 90° to point them.
  • Raised stays for anything else, such as a chair. It adds on top: a chair on a dais stands them at the dais's height plus their Raised.
  • Floating. Raise someone with nothing under them and the studio asks first: Emina is 0.80 m above the floor with nothing under them. Keep Emina floating? Keep floating keeps them up there with no block under them, in the view, the sketch, the blockout and on the plan, and a still's or a take's words say so. Put on the floor (or Esc) sets them down. Either way it's one step of Undo. Anything under them counts, a chair, a dais or a rock. Once someone is floating, a new height doesn't ask again, and they stay floating until you put them on the floor. In a shot where something is under them, they have their block there and the words don't say they float.
  • The arrows go by where you picked someone. Picked in the view, they go by the camera, as before. Picked on the plan, they go by the screen: → moves them right on the plan as it's drawn and ↑ up it, whichever way the camera faces.
  • Esc lets go first. With someone picked, the first Esc lets them go, and the next leaves the Viewfinder.

Viewfinder in 0.64: the divider and Full screen

  • Drag the divider between the view and the plan to give either more room; the plan grows with its column. A double-click puts it back. It's remembered for you on this page, in this browser.
  • Full screen is on the view (top left) and on the plan (bottom right). F takes the one your pointer was in last, the view until then; F again or Esc comes back. In full screen the top bars step aside and everything in that part works the same.

Viewfinder in 0.63.5: match the first frame, the plan's grid, names apart

  • Where a last frame's walk comes from. When someone stands or faces otherwise in a shot's last frame than in its first, their pop-up in the last frame says so, and why: Emina walks 1.4 m in 2C (set by hand). It may also say from 2C's words: “Emina walks to the side window.” (the studio drafted it from the shot), set by an agent, from the scene's clock (another shot walks her on while 2C plays), set in this frame or set in the first frame only (a turn of one frame's own), or set by hand or by an agent (a walk set before 0.63.5, which the plan can't tell apart). A move in the last frame is still the action and asks nothing, and picking someone (a click, or opening their pop-up) still gives them the arrow keys.
  • Match the first frame (in that line) puts them back: in the last frame they stand and face as in the first, so the walk and the turn between them go. Posture, head and eyes stay each frame's own, and the camera stays where it is, so check the framing after. It is one line in History, Emina stays put in 2C, with Undo, and later shots start where 2C now leaves her: the notice names any still that goes out of date. A walk that came from the scene's clock becomes a stand in 2C only (a cheat).
  • The Move line keeps the people. While you move the camera in a last frame, the line under the readout still ends with what the people do (…, pan left 12°, Emina moves 1.4 m).
  • Grid (beside Room and Area on the plan) draws a grid over the scene's room, like a game of battleship: columns A, B, C… across the top of the drawing and rows 1, 2, 3… down. The cells are 0.5, 1, 2 or 5 m, fitted to the room (a 6 × 4.5 m room has 1 m cells, A–F and 1–5). With the grid on, a person's pop-up shows the cell they stand in beside their height, and the Move line names the cells of a walk (Emina moves 1.4 m, D4 → C4, or Emina moves 0.4 m in C4 inside one cell). It is off until you turn it on, and your browser remembers it. The grid is for you and your collaborators to talk about places: the studio and its models don't read cells yet, so in a shot's words say the place (by the side window), not the cell. A cell written there reaches the model as it is.
  • Names on the sketch never overlap. When two people stand close, the farther one's name moves up (or below the head), and one that can't fit is left out. Every sketch is drawn again once with the new rule.

Viewfinder in 0.63: the way out, people raised off the floor, the arrow keys, a big plan

  • Back to Shot List is the first button in the Viewfinder's top bar: it takes you back to the page you opened it from (the Shot List, the Storyboard, the Directing studio). Esc does the same, and so does your browser's Back. Nothing is lost: every change is saved the moment you make it, and leaving saves the shot's framing line in History. While a change is still on its way, closing the tab asks first.
  • Esc puts one thing away at a time: an open question, the pop-up you worked in last, a box you were typing in, full screen, whoever is picked; then it leaves the Viewfinder.
  • Raise someone off the floor (a dais, a tier, a podium, a balcony rail): in their pop-up, type how far they stand above the floor under Raised (0.80 m, or 80 cm), or hold Alt (⌥ on a Mac) and drag them up or down in the view. It applies to every shot of the scene, like a height, and is one line in History with Undo. They stand on a block that high in the view, the sketch and the blockout clip, and the plan shows ↑ 0.80 m under their name. Back on the floor puts them down. Their Height stays their own body's height; a height over 2.6 m isn't one (the box says so) and points you to Raised.
  • Fine-tune with the arrow keys. Click someone in the view or on the plan, or open their pop-up, to pick them; a line at the bottom of the view says so. Then ← → move them across the frame and ↑ ↓ away from or toward the camera, 5 cm a press (25 cm with Shift), and Alt+↑ / Alt+↓ raise and lower them (5 cm, 20 cm with Shift). A run of presses is one move: it asks Where should this go? once, like a drag. A click on an empty spot lets them go, and the arrows pan and tilt the camera again. Esc lets them go too. Leaving the Viewfinder in the middle of a run of presses saves what's running (a raise, a move in the last frame), and puts back a move that would ask Where should this go?.
  • The person pop-up fits: the names under Eyes on wrap onto more rows instead of scrolling sideways, and you can drag the pop-up's bottom-right corner to make it bigger.
  • More room for the plan: since 0.64, the divider beside it and Full screen (Bigger plan is gone).
  • The browser's Back works across the studio. Each page you open (Projects, Story, the Shot List, Edit…) is a step, so Back goes to the page before, and Forward comes back, also after a reload and across projects (Back onto another project's page opens that project there). When the studio loads itself again on a new version as you open a page, that page stays, and Back goes to the page before it. Once you have clicked or typed in the studio, Back past your first page goes to your projects, and Back on your projects stays in the studio, never the sign-in or the home page (unless you came from another site). Press Back twice in a row there without a click in between and you leave the studio, as on any site: browsers let no page stop that.
  • Back on a page you've just opened. Until you click or press a key on a page you've just opened, Back leaves the studio. Browsers work that way: a page can't hold Back until you've used it.

Viewfinder in 0.53: boards

  • A shot's board follows the framing you set here: the Storyboard's boards are drawn from each frame's framing in the Viewfinder, so after you change it, draw the board again from Make ▾ on the Storyboard.

Viewfinder in 0.41: the shot as it is written

  • A shot nobody has framed opens as its words declare it. The Shot List's size and lens win: when the plan's camera doesn't give that size on that lens, the Viewfinder stands the camera back along its bearing at the distance that does (an MCU on 85 mm is about 5 m off, so in a small room it may stand past a wall, as on a set with a wild wall). The camera's height and the way it looks come from the frame's own words: hip height, eye level, chest height, low angle, high angle, overhead, about four meters up, looking north. Only the camera's sentences count: light on her face from above is the light, not a high angle, and Emina is facing north-east is her, not the camera.
  • A close shot of a hand is an insert. When the focus is a hand or something held in one (the paper ticket in her fist), or the words say the hand fills the frame, the frame is centered on that hand, and the readout says so: CU Emina's right hand · 0.90 m high · … · facing N.
  • Nothing is saved by opening. The plan beside the view draws the open camera where the view shows it; the stored camera changes only when you change the framing, saved as before. A camera you placed on the plan yourself keeps its place, and a framing you saved keeps its pose.
  • When the frame still isn't the size the shot says, a quiet line under the readout says so: The plan's camera gives ECU; the shot says MCU. While you drag: This framing gives MS; the shot says CU. (when you let go, the shot's Size follows your framing, as before).
  • A scene with no floor plan yet (an older film) is drafted as the Viewfinder opens, as the Shot List's plan window does: Drafted from the shots as it opened: it's saved with your first change here. Your first change saves the plan with it, and Undo puts the change back while the drafted plan stays.

Viewfinder in 0.39: floors and height

  • A place with floors is built at its heights. A floor is about 3 m high, unless its floor plan gives its own (a shop's ground floor is taller). A building front along an outdoor place rises to its stories, with a ledge at each floor, so a lane between two buildings reads as one. A fire escape's landings, stairs, a ladder and a lift stand on the floors they belong to.
  • People and cameras have a floor, and so a height. Someone whose mark is on the 3rd-floor landing stands about 6 m up. A camera stands on its floor: from the lane it looks up at her (the readout says tilted up 34°), and from the landing it looks down into the lane. Q / E raise the camera as high as the place reaches.
  • The plan beside the view shows the open camera's floor, the floor below and the ground faintly.
  • A place with one floor reads exactly as before.

Viewfinder in 0.38: the floor plan's map

  • The Viewfinder reads the floor plan made in Assets. Places that join are one map, and the 3D stands each room where the map puts it. A room someone turned on the map is built turned: past its door, the next room stands at its angle. An L-, U- or T-shaped room has its own floor, ceiling and walls. A space the template kept but the script never goes to (a shop's storeroom) is built as a plain room behind its door, with no plate. The map's water lies where the plan draws it.
  • A turned room keeps its plates. Its walls keep their plates as the room turns; the compass in the readout turns with it (facing NW (swing door) for a camera facing the swing door of a back room turned 45°).
  • People past the door. Once the place's floor plan is OK'd, someone who walks out through a door stays in the frame whose camera follows them there. Emina out on Harbour Road, for example, stays in 3A's last frame, drawn on the street. A starting framing on her (Shots) stands on the street with her, so the street comes into frame. From inside the room, someone behind a closed door is not in the frame.
  • Change it in the floor plan. On the Viewfinder's plan, cameras and people drag, and since 0.64 so does a piece of furniture (see Move and turn pieces here). Click a door or a window to see what it is, with Change it in the floor plan: the plan is changed in Assets, so every shot reads the same one. An older plan with two doors in one doorway shows Join at the door under the plan.
  • North on the Viewfinder's plan turns the map's one north: every place on it, with their suns and moons, asked first when stills see the change. A turned room's frames read the room's own north.
  • Older plans read exactly as before until someone edits, joins or OKs them in Assets.

Viewfinder in 0.37: Zach's mock-up, the lens you type, the scene's clock and shared action

  • The chrome follows Zach's live mock-up. The open shot's color marks its frame tag, its tab, the main button and the ask's first answer. The tabs are small pills; only + 2E is dashed, and a new shot reads 2E NEW × until it is sent. The undo and redo arrows and History are one box; History always shows Now, and No changes yet before the first change. Save 2C's framing and Send 2E are the filled button. Direction is headed by the shot and asks What happens in 2C. The readout says Move: none yet before a last frame.
  • A focal length you type is kept. Dragging the frame's corner or scrolling still snaps to the known lenses (14 to 135 mm, then 200, 300 and 400) when you let go, and a lens chip sets its lens. A length typed in the Lens box (47 mm) is kept exactly: the frame, the readout, the sketch and the plan's wedge use it, while the shot's Lens on the card and in the prompts says the known lens nearest it (50 mm).
  • People carry by the scene's clock. Each shot starts with the people where the scene's timeline has them at its start. A shot starts where the shot before it ends (in Shot List order), unless you type its start in Direction (Scene clock 8.0 – 12.0 s); Back in order undoes that. If 2C pushes in from 6 to 8 s and 2D starts at 8 s, 2D picks up there. A plan with no clock set reads exactly as before.
  • The camera carries only into a joined part. A shot that continues from the one before it starts on that shot's last frame (the same camera and lens); framing its first frame says where to frame it instead. Every other shot keeps its own camera.
  • A shot's default posture comes from its own words, else from the scene's action (Zibelda leaning on the counter), never from a line of dialogue.
  • Shots that cover the same action play it the same way (cutting on action: someone sitting down, a hand passing bread, a car crash). The scene's shared actions sit on its clock with who does them, the hand and the side. Shots that cover one play it at the same times and speed, with the same hand and side, and each runs about a second past it on both sides so the edit can choose the cut. A shot that doesn't gets a yellow Action doesn't match under Crosses the line, naming the shots, with Add the handles (the shot starts a second before and its last part lengthens) and Play it as the action says. Each is one line in History with Undo. Direction shows the shot's place on the clock and what it covers.

Viewfinder in 0.36: the view, the frame and the camera

  • The Viewfinder frames a shot in 3D, from its scene's floor plan. Open it with Frame it (below). At the top: the film and the scene (2 · INT. BAKERY · MORNING), the scene's shots as tabs, your access label (Owner, Editor or Viewer: hover it to see what your role allows), the Shot List button and the save state (2C saved).
  • The tool bar: Direction, Shots, Camera, Lens, Frame, one button per person with their posture (Emina Stand), then the undo and redo arrows, History, and Gray | Pencil.
  • The view is a plain model of the place: its walls, doors, windows, fixed furniture and lamps as the floor plan draws them, people as plain figures with their names floating over them in their colors. Gray and Pencil set the view and the sketch together.
  • The frame is the white rectangle, in the film's frame shape, with thirds; outside it is darkened. Its tag says the shot, the lens and the shape (2C · 85 mm · 16:9).
  • Drag the frame to move it. When you let go, the camera turns to center it (the view slides with it), so the sketch is exactly what's inside.
  • Drag a corner, or scroll over the view, to change the lens: up for a longer lens, down for a wider one. The frame keeps its shape. When you let go, the lens settles on the nearest lens in the studio's set (14 to 135 mm, then 200, 300 and 400 mm).
  • Drag outside the frame to turn the camera. Keys: W A S D move the camera, Q / E lower and raise it, the arrow keys pan and tilt, Shift goes faster.
  • Camera has the height, tilt, pan and roll, Level, and each person's eye height. Lens lists the lenses, with a box for any millimeters. Frame offers the film's frame shapes (16:9, 21:9, 2.39, 9:16, 1:1). The shape is the whole film's, so picking another asks first; it is then one line in History, Frame 2.39, with Undo. Stills and takes already made keep the frame they were made in.
  • The readout (bottom left) reads the frame: CU Emina · 1.57 m high · tilted down 2° · 85 mm · facing SW (side window): the size and who it is on, read from how much of the person fills the frame, then the camera's height, its tilt, the lens and where it faces. Lenses are measured on the studio's Super 35 frame, as everywhere in Tarkovsky.
  • Pop-ups can be dragged by any empty part or their grab bar. Once moved, a pop-up stays open while you work, until its ×, its button or Esc, and opens again where you left it. On a phone, pop-ups are sheets at the bottom of the screen and the readout sits under the view.
  • If the browser can't start 3D, the Viewfinder says so; the frame, the readout, the plan and the sketch still work.

Viewfinder in 0.36: people, and where a move goes

  • Each person's button opens their pop-up. Height comes from the character sheet (Assets has a Height field; when the sheet doesn't say, Tarkovsky Director guesses from its words, shown yellow until someone sets it). Changing it here changes the person in every shot of the scene (Emina is 1.70 m in every shot of this scene. The character sheet says 1.64 m.), with Undo, and Reset goes back to the sheet's.
  • Posture: stand, walk, run, sit (a seat appears), lean, kneel, crouch or lie, each a pencil picture.
  • Head: 15 pictures, from profile to frame left to profile to frame right, looking up, level or down, read as seen in this shot's frame. Picking one turns the head once, and the body too when the head would turn past its limit. Moving the camera afterwards never moves the head.
  • Eyes on the other person or the Camera follows them as people move; Hold keeps the head as it is. Body has a turn slider and Face Zibelda.
  • Moving someone: drag them in the view, or on the plan (the circle moves them, the dot in front turns them). The move shows in this shot only, and asks Emina moved in 2C. Where should this go?
  • The whole scene (first, highlighted): she moves in every shot, and it names the stills now out of date.
  • Only in 2C (cheat): the other shots keep her where she was. A cheated person has a dashed yellow ring and cheat on the plan, and their pop-up says Cheated in 2C with Match the other shots. Moving them again in 2C moves them only there.
  • A new shot, 2E: 2E is made from 2C with the move, and 2C stays as it was.
  • Cancel (or Esc) puts her back. Nothing is saved until you answer, and the answer is one line in History.
  • A move in a shot's last frame is the action, so it stays in that shot. Posture, head and eyes belong to each shot: they are the performance.
  • A shot that already has a take: you can still change its framing or blocking; its History line is yellow, plan changed after the take.

Viewfinder in 0.36: the floor plan and the line

  • The plan (top right) is the same floor plan as everywhere: each shot's camera a wedge in its color as wide as its frame, labeled 2A to 2D, and the people as colored dots. The open shot's camera drags, and its dot turns it. Click another shot's camera to open that shot.
  • North: drag the compass to turn north, in 5° steps. When stills would see the change it asks first. North is the place's, so every scene set there turns with it: one line in History, North, with Undo.
  • Scroll to zoom, drag an empty spot to pan, and Room / Area to jump. Small names and labels hide when the plan is small.
  • The line runs between the two people's eyes, dashed, with the scene's side lightly tinted. The scene's first Shot List shot (its master) sets the side.
  • A camera on the other side turns the line yellow, and the Viewfinder shows Crosses the line at the top right of the view, for example 2B, 2C and 2D are on the other side of Emina and Zibelda. Cutting from them to 2A will flip who looks left and who looks right. The Shot List row shows the same yellow tag.
  • Move to the other side mirrors the camera across the line, with Undo.
  • Not a problem dismisses it, with Undo (Tarkovsky Director must give its reason).

Viewfinder in 0.36: where the camera faces, and the plates

  • Every camera knows where it faces: one of eight directions, and what is on the wall it looks at. The readout says facing SW (side window); the prompt lines say facing south-west, toward the side window. Outside (an EXT scene), it names the direction, or what stands there, not a wall. A place set as outdoors (Assets › Floor plan) names its edges: facing S (the harbour), and a camera past a door reads the place it stands in.
  • That picks the background plate for the shot's stills: the place's plate for that wall. 2C looking at the side window gets the west wall's plate, and 2D looking at the shelves gets the north wall's. A wall with no plate yet says No plate yet for the west wall (the side window) with Make the plate and its price (the same quote and hold as on the Shot List), and the Shot List shows New plate. Outdoors there is no wall: No plate yet for the harbour side, … for the bakery's shop front, or … for the east side on open ground.
  • A camera that sees a corner (a second wall filling at least a quarter of the frame) gets both walls' plates.
  • The order for a still: the scene's master still when it shows that part of the place; otherwise up to two direction plates; otherwise the time-of-day plate, as before. When the scene's time is the one the place's plates show, the direction plate now goes ahead of the time-of-day plate.
  • The sun comes from north and the scene's time, in through the windows and the open ways out (an open doorway, an archway), never through a closed door or into another room.

Viewfinder in 0.36: the sketch

  • The sketch is exactly what's inside the frame, in Pencil (the default) or Gray, with names over people. It follows your work a moment after you stop. A shot with a last frame has two. Until 0.68 it showed in the SKETCH panel under the plan; Frame it no longer shows it.
  • Every Shot List shot has its sketch, from the plan and the shot's size, lens, angle and people, whether or not anyone has opened the Viewfinder. Frame it's sketch of a frame goes with each of its stills, so the still follows your framing. The model takes only the blocking from it: where the camera is, where each person and thing stands, and how big they are in the frame. It counts as one more reference picture, adding up to 0.69 credits to a still. When a frame already has as many pictures as its model takes, the studio asks what to leave out.
  • Prompt lines (under the view since 0.68, at the right of the camera's words; before, at the top right of the SKETCH panel) shows, for each frame, what the frame holds in words: size and subject, the camera's height, distance and tilt, the lens, the frame shape and where it faces, and for each person where they are in frame, which way the head reads and where the eyes are. These are draft words for the tests, with Copy; they are not sent to any model.

Viewfinder in 0.36: saving and History

  • It saves as you work. Every change you make in the Viewfinder is saved the moment you let go: a camera drag, a lens, a person's pose, a starting framing. Nothing is lost if the page reloads.
  • One line in History for each visit to a shot. While you work on 2C, each drag is a step you can undo with ⌘Z (Ctrl+Z on Windows) and bring back with ⇧⌘Z (Ctrl+Y). Together they make one line in History, 2C's framing, with the steps on hover.
  • Leaving the shot saves its framing. Open another shot, press Save 2C's framing, or close the Viewfinder, and you see 2C's new framing is saved. Its still is out of date. with Undo. The top bar then says 2C saved. While a shot has unsaved changes, its tab shows a dot.
  • Its still is out of date. When the framing of a shot with a loved still changes, the still is marked out of date (it stays until you remake it). Undo takes the mark away again.
  • Decisions about the whole scene are their own lines at once: moving someone in every shot, a cheat, Match the other shots, a height, a new shot (2E), Send 2E to the Shot List, deleting 2E, and Move to the other side. Each one says what it did, for example Emina moved in the whole scene. Stills out of date: 2A, 2B, 2D., with Undo.
  • ⌘Z goes on through the scene. Once the open shot's steps are undone, ⌘Z undoes the scene's lines in History, newest first, whoever made them: yours, a collaborator's, or Tarkovsky Director's.
  • History (at the right of the tool bar, after the undo and redo arrows) lists the named steps newest first: Emina in all shots, Camera in 2C, New shot 2E. Click a step to go back to before it: it and everything after it are undone in order. Steps you undid wait at the top, above Now; click one to bring it back.
  • Undo never overwrites newer work. If what a line would put back has changed since (someone moved Emina again), its Undo says so: Emina was moved since: undo the later change first.
  • Text boxes keep their own undo. ⌘Z inside the shot's words undoes your typing, not the framing.
  • A Viewer can look around and move the camera to see, but nothing is saved.
  • Tarkovsky Director's changes are in History too. When Tarkovsky Director frames a shot, moves someone or sets a height, its line names its run, its reason shows on hover, and you can undo it like any other. Tarkovsky Director must say why for each change, and it can't change a shot that already has a take: it remakes the take or flags it. You can; the line is marked yellow, plan changed after the take.

Viewfinder in 0.36: Frame it, the shots, the starting framings and the last frame

  • Frame it opens the Viewfinder on a shot. It sits on every Shot List row (above Direct), in the shot card's Frames row, among a Storyboard frame's hover tools, and at the top of the Directing studio. The card or the studio stays open underneath; Esc closes the Viewfinder and you are back where you were. The yellow Crosses the line tag on a row opens it too.
  • The scene's shots are tabs (2A, 2B, 2C, 2D), each with its camera's color. The open one adds its name as the Shot List says it, for example 2C CU Emina. A dot on the open tab means its framing has changed and isn't saved yet. Click a tab, or click another shot's camera on the plan, to open that shot.
  • + 2E makes a new shot from the framing you are looking at: the same camera, lens and size, and the same people where they stand. It is marked new, and the Shot List shows it as a Draft row (New in the Viewfinder · from 2C's framing) until you send it. Frame it and direct it like any shot, then press Send 2E to the Shot List (top right). It joins the scene's end with its camera on the plan, and History has the Undo.
  • × deletes a new shot, with Undo. Shots already in the Shot List have no ×: delete them in the Shot List, where you can see the whole scene and its stills.
  • Shots opens nine starting framings on the person you pick under Shots on: CU ¾, CU from below, MCU ¾, Over the shoulder, Two-shot profile, High angle, Low angle hero, Wide master and POV. Each one is a live picture of this scene, on its side of the line. A framing a shot already uses carries that shot's label (2A on Wide master, 2C on CU ¾). Click one to start the open frame from it.
  • Direction shows the shot's words from the Shot List. You can edit them there: they save as you type, with a line in the Shot List's History.
  • First frame and last frame. + Last frame (over the view, top left) copies the first frame, so you can move the camera or the people to set where the shot ends. The readout then names the move, for example dolly in 0.5 m, rise 0.2 m. × removes the last frame. When the frames move but the shot's Move still says hold, Use dolly in (or rise, *pan right*…) sets the Move in one click, with Undo in the Shot List's History.
  • The card follows the framing. When a framing reads as another size or lens, for example an MCU on 65 mm where the card said CU on 85 mm, the shot's Size and Lens change to match. The History line says so: Size CU → MCU, lens 85 → 65 mm.

QUESTIONS · VIEWFINDER

Questions, answered from the guide.

How do I open the Viewfinder?

Frame it opens the Viewfinder on a shot. It sits on every Shot List row (above Direct), in the shot card's Frames row, among a Storyboard frame's hover tools, and at the top of the Directing studio. The card or the studio stays open underneath; Esc closes the Viewfinder and you are back where you were. The yellow Crosses the line tag on a row opens it too.

Do I need to save my framing?

It saves as you work. Every change you make in the Viewfinder is saved the moment you let go: a camera drag, a lens, a person's pose, a starting framing. Nothing is lost if the page reloads.

What happens to a shot's still when I change its framing?

Its still is out of date. When the framing of a shot with a loved still changes, the still is marked out of date (it stays until you remake it). Undo takes the mark away again.

What does Crosses the line mean?

A camera on the other side turns the line yellow, and the Viewfinder shows Crosses the line at the top right of the view, for example 2B, 2C and 2D are on the other side of Emina and Zibelda. Cutting from them to 2A will flip who looks left and who looks right. The Shot List row shows the same yellow tag.