TARKOVSKY FIELD GUIDEOpen studio →

FIELD GUIDE · CHARACTERS AND PLACES

Characters
and places.

Assets holds the film's world: one sheet per character, place and thing, made from the locked script. A character's angles come from one identity picture, so every shot sees the same face; a place gets a floor plan and plates that follow it. Every image is checked as it lands, and the heart marks the one every shot is sent.

04 / ASSETS

Build a consistent world.

Assets in 0.72: a scene's time of day changes

  • When the time shows. A scene's time of day shows when the scene is outdoors, when its place's floor plan has a window, a skylight or a door to the outside, or when the scene's light note ties the light to the sun or the moon.
  • What Lock flags. When you change a scene's time of day (night to day, say) and Lock the script, and its time shows, its stills read Out of date: the time of day changed after this still and its takes Out of date: the time of day changed after these takes. A scene that says CONTINUOUS or LATER takes the time of the scene before it, so it changes with it.
  • The plate for the new time. If the place has no plate for the new time, its sheet here and the scene on the Shot List say Scene 3's time of day is now night. Harbor Road has no plate for night yet., with Make the plate for night · about 4 credits. It is made from the loved plate, as Time of day, weather or season makes it, and the line goes once the plate is on the sheet. The loved plate keeps the time it was made at: after the change it no longer goes with the scene as if it were the new time.
  • When the time doesn't show (a windowless room lit by its own lamps, say), nothing is flagged, and the place's one plate goes with every time of day: the sheet asks for no night plate, and its shots wait for none.

Assets in 0.72: a description waits for your other changes

  • Your description waits for your other changes (0.72). When you save a description, your other changes on the page save first, and the note stays open until they do. If they can't be saved, the note keeps your words and says why. Your description then saves as soon as your other changes do, or when you press Save. Closing the note keeps your words; Cancel or Back lets them go.

Assets in 0.72: a place's angles

  • Each angle is made from its own words. Pick a place's alternate and set Angle to another view, such as Right: the box now holds the studio's prompt for that view, with where things stand as that view sees them. Your edit of the picture stays with the view it was made for, and the box says which. The line under the picture names that view, and says what Angle is set to: Master · an alternate · set to Right for Love and Generate.
  • A reverse or a side turns from the loved master. Made again, it goes with the master you love, sent as the master plate: the room this plate turns from, never an older master.
  • The pictures beside Angle open large. Click one to see it full window, with its label: the words the image model reads it by. Click outside the picture or press Esc to close it.
  • When an angle's words don't match. The box says so when its words say where things stand in another view, when your edit doesn't have the place's description as it is now, or when it has it twice. Back to the studio's prompt puts in the studio's words, with the description as it is now. Back to your edit brings yours back.

Assets in 0.68.5: the page's own chat, and a photo beside Angle

  • The page's own chat says what it's for. With nothing open (the Color palette, Style References), Ask or direct says: Ask about this film's characters, locations and elements: which have pictures, what to make next, what the script says. To ask about one of them, open it: each has its own chat.
  • A photo you attach is called a photo. In the line the image model reads, a photo beside Angle is Emina · a photo of how Emina looks (it was Emina · reference), so it is never taken for a picture the studio made. A picture with no photo is sent as before.
  • Your own OpenRouter key at its limit. If OpenRouter turns a request down because your key has reached its limit, the page says so: Your OpenRouter key has reached its limit, so OpenRouter turned this request down. Raise the key's limit on OpenRouter, or save another key in Models, then try again. (It used to say "Check the model ID and account access.") The studio's own key keeps its own line.

Assets in 0.68.3: each character, location and element has its own chat

  • Its own chat. Open a character, a location or an element, and Ask or direct is about that one only. CONTEXT names it. Open another, and its own chat comes up, empty if you haven't asked about it yet. Go back, and the first one's chat is still there.
  • The AI reads only that chat. When you ask, it reads the conversation about the one you have open, never another's.
  • Your earlier questions show on the character, location or element each was about. Nothing was deleted. On the Color palette and Style References tabs, where nothing is open, the chat is the page's own.
  • A reply stays where you asked. Open another one while a reply is coming, and its chat says whose reply is still coming. When the reply lands, a note says which chat it's in.
  • Your message shows your own words. Clear empties only the chat you see.

Assets in 0.68.3: a picture that wasn't made says so

  • A picture that wasn't made says so under the viewer: The front wasn't made. and why, with Dismiss. This covers Generate, Make front and Make them. The line goes when you dismiss it, or when you make that angle again.
  • A photo beside Angle goes with the picture as a reference. A line under the reference line says which number it is: Picture 1 is the photo attached beside Angle. It isn't a picture the studio made. Take the photo out with its × and the line goes.

Assets in 0.68: a deleted sheet, a location a heading names, and card scenes

  • Delete takes the sheet; the next Lock makes a fresh, empty one while the name is still in the script. Delete and untag every scene keeps it deleted, however the scenes move.
  • A location a scene's heading names can't be deleted: its window quotes the heading, to change in Story first (or make it another kind of line), and offers only Keep it.
  • A scene at BLACK or over a title card needs no floor plan and no plates, so nothing in Assets waits for them.

Assets in 0.67: a product's packshot lines are fixed, and a look runs on

  • A product's white packshot line and its side or back line always go, like a thing's. On the Assets desk, the side or back line and the white line show in the box in gray, marked Always sent, so the sheet stays consistent. On the full sheet's Turnaround, the side's and back's sentences and the white line go with each picture. An agent or Tarkovsky Director can't drop them either: any it leaves out goes back after its words.
  • A look runs on. A look set for some scenes runs on into the later scenes that set no look, in story order, until a jump in time or a flashback. A look of another age (Young, say) still ends with its scenes. A look with no picture yet says so on the later scenes it runs into.

Assets in 0.66: a group's sheet

  • A group has one picture. When the script writes a character as several (a crew, a crowd, "Two Mules"), its sheet is a Group Sheet: one picture, the Group front, at 16:9, a few of them side by side on the plain gray background. It sets their look. Every still and take that shows the group is sent that picture, and no other angle is made or asked for.
  • About how many. The sheet shows Group · about 12 beside the name. The number comes from the script (From the script: “At least a dozen FERRY CREW”.), or from the sheet's own words. Change it in its box; empty the box to go back to the script's. If nothing says, the sheet asks: How many in Dock Crowd? About ___.
  • One person, not a group. Press it and the usual six angles come back, with every picture the sheet has. A group, not one person switches it back. For a character the studio read as one person, the same switch is under Details.
  • Its fixed lines are its group line, the plain gray background line and the film's live line. A look of a group has its own group front.
  • A group's picture isn't checked against its words, so it is priced as the picture alone. A group costs one picture where it cost five or six.
  • A sheet from before. A group that already has other angles keeps them on its sheet, with a line that says so. Once it has a group front, every still and take is sent that one.
  • History. The switch and the number each write a line in the Assets desk's History, with Undo.
  • On the floor plan a group is still one figure. Frame it doesn't draw the full number yet.

Assets in 0.65: more of the studio's lines are fixed

  • The studio's lines that keep pictures consistent always go, and show in the desk's box in gray as fixed lines, marked Always sent, so the sheet stays consistent: a character's angle line, the plain gray background line, the film's live line (it changes only with the film's style), a look's line, a profile's facing line, and the sentence an angle made from the loved front carries; a thing's gray line and its side or back line; a place's empty-plate line and, for a reverse or a side, the line that turns the camera. You can read and copy them, but not type in them, delete them or move them. An agent or Tarkovsky Director can't drop them either.
  • With every word of yours cleared, it says The box is empty: the fixed lines alone are never sent, except on an angle made from the loved front, whose prompt is its fixed lines.

Assets in 0.64: a sheet picture's studio lines are fixed

  • Three lines always go with a person's sheet picture: the angle's line, the plain gray background line and a look's line. In the desk's box they show in gray as fixed lines, marked Always sent, so the sheet stays consistent. You can read and copy them, but not type in them, delete them or move them.
  • Type anywhere around them: before, between or after. Generate sends the box as it is, the fixed lines with it. With every word of yours cleared, it says The box is empty: the fixed lines alone are never sent.
  • A picture made from your edit opens on that edit, and Generate makes it again from it. One saved without a line in 0.63.5 opens with the line back.

Assets in 0.64: three dividers

  • Drag the dividers to give each part more room: between the list and the middle, between the middle and the looks and versions, and under the picture, where the prompt box takes what the picture gives. A double-click puts one back. F still opens the picture in the full window.

Assets in 0.63.5: a little bin on every picture, and History

  • Delete a picture from its tile. Each picture under Alternate versions has a little bin, and so does the big picture. A click takes it off the sheet at once, and the notice has Undo. What was made with it stays as it is, and it comes back where it stood, with its heart's place untouched.
  • A loved picture stays. Its bin is dimmed and says why on hover: love another picture to replace it.
  • History. The History button beside Details lists what changed in Assets (a deleted picture, a floor plan, a description), each line with its own Undo.

Assets in 0.63: a new front makes the other angles out of date

  • A new front makes the other angles out of date. When you love a new front and choose Use it from now on (or love it when nothing has been made from the old front yet), every angle, still and take made from the old front gets the red must-fix flag. That holds however the new front is loved: in the heart pop-up, with the desk's heart, on the full sheet, or by Tarkovsky Director. Taking a front away counts too (Doesn't match: remake on her front in the marks check, or a save that takes it off her sheet): what was made from it stays flagged until you love a new front. Deleting a character, a location or an element changes none of this: the stills and takes made with its pictures stay as they are, as the delete window says, and what was out of date already stays out of date. Filing her as another kind (a reference, a location) keeps every flag too, and her front's move is counted. While she has no front, a frame that shows her waits for one, and nothing is made or charged: Emina's front picture was taken away, so this frame would be made without Emina. Love a front picture of Emina on the Assets desk first, then make it. A picture you kept stays kept when a look's front moves off the same old picture later, and a look's new front flags only that look's own pictures, stills and takes, never your base pictures. Its hover: Out of date: no longer matches front picture. The studio won't use it until you remake it or keep it. The flag shows on the angle's tile and under the picture on the Assets desk, on the frame in the Storyboard, on the still or take in Dailies' bins and on the clip in Edit. A look built on the old front (its front and its other angles) is out of date too. Any other change of a loved picture keeps the older-look mark, which is informational.
  • Nothing out of date is sent. No still or take is sent an out-of-date angle, in any scene, unless you say so for that shot. When a frame needs one, its Make asks first (see Storyboard), and so does a take's Generate in Dailies. A thing's out-of-date side or back is left out, and its front goes. An out-of-date still or take isn't used either until you remake it or keep it: not as a take's first or last frame, not as the frame before, not as the scene's set reference, and no frame is taken from it, so a later part of a shot doesn't start from an out-of-date take's last frame, and a dissolve in one isn't fixed with a part 2. Something you asked for from the old front that hasn't been sent yet when you love the new one (an angle on the desk, the other angles a love makes, a frame's Remake it) isn't sent, and nothing is charged for it: Emina's back wasn't sent: it would have been made from the old front picture. Make it again, and it is made from the new one. The other angles your new front's love makes go from the new front. Something that was already being made from the old front comes out out of date, and never takes the place of a picture made from the new one.
  • A new front made on the full sheet. When Emina's sheet already has a front, a front you generate there goes into her Alternate versions on the desk, not over the one she has, and the sheet says so: Generating. It lands in Alternate versions on the desk when it is ready: love it there to make it the front. Love it there, and the heart pop-up shows what was made from the old front first. A front her sheet doesn't show yet is filled: when her sheet image stood for her front (Zibelda with only her sheet image), that is a new front too, and the stills made from the sheet image are out of date, also when her back or another angle was made first. A place's first plate becomes its master, as before, and what was made from its sheet image is out of date.
  • A look's own new front. When a look's front was your base front itself (the Deck coat used Emina's base front) and you love a new front for the look, her base front stays in use: nothing of the base goes out of date, and the heart pop-up neither says so nor offers to remake her base pictures or frames.
  • Remake it, or keep it. Under an out-of-date picture the desk says Made from the old front picture. Generate remakes the left profile from the new one, or keep it as it is. Generate makes the angle again from the new front, and the new picture takes the angle's heart (the old one stays in Alternate versions, liked); the flag goes. Keep it keeps the old picture as it is: the flag goes, and the studio sends it with stills and takes again. Flag it again takes Keep it back. A still or a take has its own Keep it: on the frame's Make on the Storyboard, on a take's Generate in Dailies, and on its red flag in Dailies' bins. Love the old front again and every flag clears by itself. A picture a new front flagged that you love as the front later is the front: it is sent, and the other angles are made again from it. A look's angle is made again from the new base front and the look's words while the look's own front is out of date, never from the old picture. A look whose front is your old front picture itself is remade the same way, with the look's words: the new picture becomes the look's front, so no frame asks for it again. While one remake of an angle is on its way (the desk's Generate, the full sheet's angle, a look's The look, a frame's Remake it, Use it and remake…), nothing remakes it a second time, also while Use it and remake… waits for a free lane to make it (three things being made at once, in any of your films). It starts when one of your stills, takes or pictures finishes, in any film, or when you make a frame that needs it: a music take or an effect finishing doesn't start it. Press Keep it (or love another picture there) while it still waits for a lane, and it isn't made: nothing is charged, and what waits for it goes on from that picture. Press Keep it once a remake of that angle is asked but not sent yet (the desk's Generate, the full sheet's angle, a look's The look, a frame's Remake it, or Use it and remake… with its turn in the queue), and that remake isn't made either: its credits go back, nothing is charged, and the picture you kept stays: Emina's back wasn't made: it isn't out of date any more. Nothing was charged. A frame's still or a take that waited for that remake isn't made then either, and nothing is charged for it: it stays as it was. Make it again, and it goes with the picture you kept. A remake is what you ask while the picture is out of date. One you ask while it is kept, or once you have loved another picture there, is an alternate: it is made as asked, and it lands in Alternate versions while the picture it was asked beside is still in use when it lands. Love the old front again while Use it and remake… still waits, and nothing of it is made: nothing is held or charged, and every still and picture stays as it was. Anything of hers that is still waiting or queued when you delete her, or file her as a kind with no such angle, isn't made either, and nothing is charged for it. A remake whose own part failed holds nothing up: the frame's Make goes.
  • Tarkovsky Director remakes it. When a Director run needs an out-of-date angle for a shot's still or take, it remakes that angle from the new front first, within the run's budget, and never uses the flagged one. It says so in one line in its log: Remaking Emina's left profile from the new front picture, so this shot matches it: about 11 credits. (the price is the studio's own quote for that angle). A run remakes each one once: a frame that needs one it is already remaking waits for it and is made on its next step. An outside agent asks you instead, on the frame's Make or the take's Generate. Only you can keep an out-of-date picture, still or take, love an out-of-date picture as the front (on the desk, in the heart pop-up or in a save), take away a front something was made from, take a character out of the project (or save her under a new id) when something was made from her or is out of date because of her, file her as another kind, or choose Use the old one, also while a Director run is working. No agent's New shot, Duplicate, Undo, History step, board version, Edit remake or Storyboard split ever brings your Use the old one back or copies it to another shot. Your own Duplicate or split of a shot takes your answer along, and a new shot starts without one.

Assets in 0.60: one picture for each angle a shot shows, and a full-length front

  • A frame gets the picture of the angle it shows, and no other. A still is sent the loved picture of the angle its frame pulls of each person: a close-up the three-quarter, a medium shot the front, a wide the full body, a camera behind them the back, as the frame's words, the shot type and the floor plan say. Another angle no longer goes in its place.
  • A missing angle is made first. When that angle has no loved picture yet, the studio makes it from the person's loved front before the still, inside the price you see (+ Emina's full body · about 9 credits), as it already did for the back and the profiles. A profile's Use the front still sends the front for that frame.
  • A take gets each angle it shows. It is sent the angle its first frame pulls and the one its last frame pulls, each loved picture once. When the model has room for fewer, the angle the take ends on goes first: the first frame already shows the start.
  • Each picture says its angle. Its label, which the model reads, is Emina · three-quarter, faces frame right: the angle, then the side the person faces when it's known (a profile always; a three-quarter when the frame's words or the floor plan say). The front, the full body and the back name no side. After it come creature for a creature, the look's name and the other names the script uses.
  • The front is full length. A new front is made Front view, full length, head to toe, feet visible, looking straight into the lens. A remake of an older front whose prompt already has the old head-and-shoulders line is sent as it is, never with both.
  • A blind marks check is built and switched off. It reads which way a profile faces from the picture alone, without being told the side, and the studio then compares that with the side the profile should face. It waits for Zach's paid test; until then the check is the one he approved.

Assets in 0.59: delete a character, a location or an element

  • Delete it from the desk. Delete character (or location, element…) sits beside Details at the top of the desk, and Delete New character… at the foot of Details, where + New opens. On the full sheet's list each card has its bin on hover. Viewers don't see it.
  • The window says what goes with it before anything changes: its pictures (and how many are loved), the stills and takes made with them (they stay as they are, but a remake won't have its pictures to send), the scenes that tag it, the looks that wear it. Delete takes it off Assets; Delete and untag every scene also keeps the next Lock from making it again; Keep it changes nothing. The stored pictures stay in the project's Uploads. You can't undo it.
  • A palette of your own can go too. Under USED BY, Delete this palette: the scenes that chose it follow the film's default again, the shots their scene's palette. The film's color palette is kept, always. Style references go as before, with × in the film's style box.
  • A new sheet opens without an error. A character, location or element just made with + New no longer asks the studio for pictures it can't have yet.

Assets in 0.57: profiles that face the right way, Keep the picture finding by finding

  • Each profile says which way to face. A left profile is made with Emina faces frame left. at the end of its prompt, as the right profile has Emina faces frame right.; words in the box that already say which way the face points are sent as they are.
  • Love and remake them on a copy. A copied project's sheet offers Make this the front? like its original's: the other angles are priced first and made again from the new front only when you choose Love and remake them.
  • Keep the picture, finding by finding. Keep the picture lists each thing the check found, the sheet's sentence beside its rewrite: Keep or Ignore each one, edit the rewrite in its box, and Confirm saves only what you kept, as you wrote it. Nothing is called again and nothing is charged.
  • The plans and the script that still say the old words. Beside the note, the studio says where the shot plans, the scenes' beats and the script of the scenes the sheet is in still say what the picture changes (The script and 11 shot plans also say six legs.). Keep the picture offers Change them in the shot plans too, each field listed with its new words and each one yours to leave out, and Change them in the script too while the script isn't locked; a locked script keeps its words (The script is locked: change it in a new draft on Story.). It's one save, free.

Assets in 0.56: + reference per picture, and only the loved pictures in a frame

  • + reference is the one way to add photos to an asset, up to 3 per picture (a face, a costume and a detail, say), and they stay with that picture: a character's front (the base's and each look's), an element's main picture (the base's and each state's), and a location's master and each side of the set pack (reverse, left, right). The button shows only there; at three it reads Up to 3 references, and a photo's × on its chip takes it off the picture. Each picture's photos go only with that picture's make: a side's with that side, never the master's or another side's.
  • A character's other angles are made from the loved front alone, with that angle's words: no photo, no base front beside a look's own, no costume piece.
  • Stills and takes get only the loved pictures, one of each: a character's right angle or full body (the angle the frame pulls), the location's plate for the side the camera faces, and the element's picture in its state for the scene. A character's other angles no longer follow while the model takes more, and no photo goes.
  • The full sheet's References for this asset box is gone. The photos a project put there stay in its data, never deleted, and are no longer shown or sent with anything; add the ones you want again with + reference on the picture they belong to.
  • Up to 3 style references. New project takes up to 3 (Add goes once there are three), Project settings shows the three Write the style reads, and a save that would bring a film past 3 is refused. A film with more from before keeps them: Write the style reads the first 3, and the box shows the rest dimmed for you to take out.

Assets in 0.55: other angles from the loved front, and loved pictures stay

  • A character's other angles are made from the loved front, not the words. Every angle but the front (the profiles too, and a look's angles once the look's front is loved) is sent with Keep everything exactly as in the reference picture: the face, hair, body, clothes and colors. in place of the description, so the angles stop drifting from the front; the first front, and a look's front, are still made from the words.
  • The right profile is made like every other angle. It no longer waits for anything: Make, Generate and a shot that needs it make it from the main picture.
  • A loved picture stays loved until you love another. Assets has no Unlove; when you love a new front and the other angles were made from the old one, Make this the front? offers Love and remake them · about 27 credits (each angle made again from the new front, never above that price), Love only or Cancel.
  • A picture that isn't loved can be deleted. The bin on the picture takes it off the sheet (since 0.63.5 at once, with Undo); and every still and take made with it keeps working.

Assets in 0.54.3: the picture against the words

  • A made image is read against the sheet. When the studio makes a sheet image (a front, an angle, a look's image) and it lands, Tarkovsky Director reads it once against the sheet's words and notes what disagrees, under the picture, in yellow: The front shows short gray curls; the sheet says a long gray braid. The check rides inside the image's price (the quote says what each is). Nothing is blocked.
  • Keep the picture, Remake, or Ignore. The picture is what every frame copies, so Keep the picture shows the words rewritten to the picture (a long gray braid becomes short gray curls) and saves them on Confirm; Remake makes the angle again from the words, at the desk's price; Ignore closes the note. An uploaded image is not read as it lands: Check against the words reads it on the desk, its price first.
  • Lock says which sheets have an open note. One line as Lock goes on (Sheets with an open note: Zibelda (front)), never a block. An agent run reads every note as minor.
  • The angle isn't a finding (0.71.1). The sheet's words describe the whole person or thing. Each picture shows one angle. So a note never calls a profile wrong because the words say front view, or a close-up wrong because they say full body. Keep the picture never writes an angle into the sheet's words. A real difference, such as the hair color, still shows.

Assets in 0.54: a creature, not a person

  • The switch. A character's sheet has A creature, not a person under Height. Set it for a dragon, a hound, a marsh beast: anyone the script treats as a character who isn't human. Until someone sets it, the sheet's first sentence decides (A creature, not a person: …, a knee-high goblin and a dapple-gray mare count; a woman in her thirties doesn't), and a sheet whose words say creature shows the switch on with a guess from its words in yellow. Click it to set it either way; a person needs nothing.
  • What it does. A creature's picture goes first among a frame's references, before the people, however small it is in the frame: a model holds a face from one reference and has nothing at all to draw an invented creature from. Its reference is labelled creature (Grip · creature · also "the hound"). A frame that speaks of a creature without naming it (a large creature stands in the water, the beast lowers its head) gets the scene's creature; with two creatures in the scene both go, and a yellow note asks which. An Other name that starts with the or a now matches with words between: the beast finds the gray-pink beast and the old beast.
  • Height up to 30 m. The Height field takes a creature's height (6 m, 0.6 m); the still prompt carries it as scale against the people in the frame. The Viewfinder's figure keeps a person's range, so a tall creature's figure stands in at a person's height until the Viewfinder knows creatures.

Assets in 0.50: the Motion line, up to 3 references, remaking an upload, the palette's words

  • The Motion line. When the film's style isn't live action, Write the style adds one line under the style, starting with Motion:, that says how things move in that style (for example Motion: drawn on twos with held poses.). When your words say how the characters or the film move, the line says what you mean in a few clear words. Every take carries that line, and only that line: never the rest of the style, which the stills carry. A live-action style carries nothing to the takes, and no still carries the Motion line.
  • Your own Motion line. The box shows the Motion line on a line of its own, under the style. Change its words and the takes carry yours; delete the line and the takes carry none; type a line that starts with Motion: and it's the film's Motion line. Brainstorm changes the style only: Use this keeps the Motion line under it.
  • Up to 3 references. Write the style (and Brainstorm, and Create a new color palette) reads up to 3 reference pictures, in the box's order. The box says Up to 3 references beside + reference, which adds no more once there are three. A film with more from before shows them all, dimmed past the third: they aren't read. Remove one to read another.
  • Write the style's messages. No style came this time. Please try again.; The style is being written.; That's enough for this hour: try again later. (30 an hour); Write the style isn't available right now. Please try again later.
  • An uploaded picture is remade too. After the style changes, an uploaded picture of a character or a place is flagged Made in the earlier style like the others; its flag's hover asks Remake this picture in the film's style? Select it and Generate remakes it from the uploaded picture as its reference, with the description and the film's style now. Remake them in the style's box counts it with the others, with the price first. Either way the new version lands beside the upload, in Alternate versions: the upload is never replaced or deleted and keeps its heart until you heart the one you want. Once its new version is made, Remake them doesn't offer it again for that style.
  • The flag's hover on a picture a job made: Select it and Generate makes it again in the film's style. The flag still reads Made in the earlier style.
  • The film's color palette's window, while another palette is the film's default, says Heart it to make it the film's default again. (its card keeps Kept, always: heart it to make it the film's default again.).
  • A scene or a shot that chose No palette before 0.46: its palette window says No palette was chosen. Want one? Pick any palette, or make your own.
  • A commercial's brand rules go to the palette. When Tarkovsky Director proposes the film's palette (at Lock, or with Propose one), the rules read from an uploaded style guide go with the brief, as data, within the same limits as the brief (each rule up to 600 characters, at most 24, and the whole brief within 12,000 characters).

Assets in 0.47: the film's color palette, its default, and the headings

  • The film's color palette. The film's palette is called The film's color palette now, with no Proposed at Lock chip (Lock still proposes it, free).
  • + New palette is a tile beside the palettes: it opens the palette window with no colors yet (a name, then Swatches or a palette file, From a photo, Describe it, Brainstorm, or Start from it on another palette). + New at the top still does the same.
  • A heart marks the film's default, as on takes: every tile has one (its tooltip: The film's default), and so does the open palette's card, beside Why these colors. Heart another palette and it becomes the film's default (Faded photograph palette is the film's default now. The film's color palette stays in the list.); un-heart it and the film's color palette is the default again (The film's color palette is the film's default.). Viewers see the default's heart and can't change it.
  • What the default does. Its card says Every scene uses it, unless the scene or a shot has another.; its USED BY says Every place's pictures, and every still unless the scene or the shot has another palette. A scene or a shot with no palette of its own follows it, so their stills carry its Palette: line, and so do a place's pictures (and a wardrobe's, the extras' and the other pictures that carried the film's palette before). A scene's or a shot's own choice still wins, the film's color palette too when another is the default, and a No palette chosen before still means no palette line. Choosing the default itself for a scene makes the scene follow the default again. Pictures already made keep their colors.
  • The film's color palette is never replaced or deleted. While another palette is the default, its card says Kept, always: heart it to make it the film's default again. Its window has no Or start from another palette (and no Set as the film's palette), so you can always go back to it; Change still edits its colors and Tones. Any palette can still be used for a scene or a shot; the other palettes' windows keep Start from it.
  • Assets' headings (characters, locations, elements). The line over the picture is the name in the heading font, then the look's words and where it's used: Harbour Road then Default · Scenes 1, 3 (a character's Default: Default · every scene; a numbered look: Look 2 · Outside · sc. 4). The tag shows when you hover the name. The line under the picture (LOC_Harbour_Road_01 · Master · ♥ @LOC_Harbour_Road pulls this for the master) is in the page's font now, not the mono font, with the angle and the tag in bold.

Assets in 0.44: Style References, and the Color palette

  • References are Style References now: pictures of a style to follow, exemplified by, but not limited to, an animation still, a high-contrast photo, a pastel photo, a painting. Every picture follows its style. Its colors become a palette only if you choose Use its colors (on the open picture's line), which opens the film's palette with its main colors.
  • Color palette, beside Style References: the film's palette (proposed at Lock, Proposed at Lock until changed) and every named palette, each a tile with its colors. Change opens the palette window; + New makes a named palette for any scene or shot. USED BY says what uses the open one: the film's is used by every place's pictures and every still unless the scene or the shot has another.
  • A single shot has no Assets page: its film's palette is at the top of its Shot List.

Assets in 0.47: the film's style (Style References)

  • Style References is the film's style now. Under The film's style, one box holds the style's words, with the reference pictures in it as thumbnails: × removes one, a click shows it on the right (no taller than about 240 px). Empty, the box says "Animation, black and white, … (the default is live action in color)", and the stills carry "Live action, photographic.", as before.
  • + reference adds pictures (several at once). Write the style (shown once there's a picture or words) has Tarkovsky Director look at the reference pictures (up to 3 since 0.50; up to 8 before) and read the words, then write the style in the box: one short paragraph of at most 60 words about the medium, the color, the light, the contrast and the texture, and the lens when the pictures show it. It's free. Press it again with nothing changed and it doesn't ask again.
  • When the pictures disagree (or the pictures and the words), the box shows the question in yellow. When the question offers two choices, they're buttons (Black and white / Color; Follow the words / Follow the pictures), and a choice writes the style again with your answer. Otherwise the question has a box for your answer.
  • A name is read for its look and never written into the style. Type "Disney" or "Van Gogh" and the box says so; Write the style describes how that work looks instead.
  • Brainstorm (the silver button, bottom right) opens Ask or direct on the right: "Brainstorming the film's style. Change it in the box yourself, or tell me here, a little at a time." Each answer is the style with that change, with Use this. Each change costs about 1 credit: its price is held first and only what it used is charged. A refusal or an empty answer costs nothing. Its box suggests a next step, and a "Note:" says when the change goes against the pictures.
  • Create a new color palette (once Tarkovsky Director has written the style) opens New palette filled with the pictures' main colors ("From the film's style: 8 colors. Edit any of them below."). Name it, change any color, then Use this palette. The film's color palette doesn't change.
  • Where the style goes. Every still, and every picture of a place, a thing or a group of extras, carries the film's style in place of "Live action, photographic.". A character's identity pictures keep their plain gray "neutral identity" line. Under a style that isn't live action (animation, a painting, a drawing), that line's last sentence ("Unretouched documentary photograph, 85mm, eye level.") becomes the style. Takes carry no style line: they follow their stills (since 0.50 they carry the style's Motion line, when the style isn't live action). With a style, Model drafts no longer ask "Is this live action or animation?", and an earlier answer to it is set aside. A film with no style reads exactly as before.
  • Changing the style after pictures exist flags the characters' and places' pictures made in the earlier style: a yellow "Made in the earlier style", usable as is. The box offers Remake them with the price first. Nothing is remade by itself, and stills already made keep theirs. Each remade picture takes its look's heart as it lands. Since 0.50 an uploaded picture is remade too, from itself, beside it (see 0.50 above).
  • The words are saved when you leave the box. Viewers see the style and the pictures; only editors change them.

Assets in 0.39: how Lock draws a plan, and Redraw from the script (§49)

  • Each kind of place has its own layout. Lock reads what kind of place each new place is: an alley, a street, a square, a park, a car park, a waterfront or a rooftop; a forest, a field, a beach, a desert, a mountain path or open water; a shop, a bar, a restaurant or café, an office, an apartment, a house, a hotel room or a stairwell; a room of one; a car, a van, a bus, a metro car, a train carriage, a boat or a plane cabin. Each kind is a set of rules rather than one drawing: its usual size, what bounds each side, its ways in, the rooms it must or may have and how they connect, and what it usually holds. Alley is no longer read as a street.
  • A dead-end alley is a strip about 3–5 m wide and 15–30 m long. It has a building front on each long side, with its stories, a wall at the blind end and one open end. What the script puts there goes in it: the fire door in a front, the dumpsters against a side, the fire escape's landings up to the floor the words give (three floors up is the 3rd floor), with a ladder down.
  • No two films get the same apartment. The rooms are arranged for each film from its own words: a studio, one bedroom or two; the front door into a hall or straight into the living room; an open or closed kitchen; the bathroom off the hall or off the bedroom. The same film always draws the same plan. A shop keeps its shop floor, back room, storeroom and street.
  • A brief before drawing, and a second look after. At Lock Tarkovsky Director first writes each new place's brief: what kind of place it is, what bounds each side, its ways in, its size and floors, and what the script puts there. It builds the plan from that brief, then reads the plan back beside the brief and the script and fixes what doesn't fit, once. Anything still wrong is a yellow flag on the plan: Doesn't read as a dead-end alley yet: …, with Show and Not a problem. The brief is kept with the plan. Both steps are free: no price at Lock, nothing held or charged. When the studio's model is slow or unavailable, Lock doesn't wait past 15 seconds and draws from its own rules.
  • A relock never redraws a plan already drawn. To draw an older place's plan the new way, use Redraw from the script · Free. It redraws the whole plan the place is on (the places that join share one plan), as Lock now draws a new place. It's one History line with Undo, which puts back the old plan, its rooms and its OK. On an OK'd plan it asks first: redrawing takes the OK back, and the stills and plates made from the plan read Made from the earlier plan. Tarkovsky Director can redraw too, saying why.

Assets in 0.39: floors, sides, and words that change the plan (§49; the plan's data, check and words)

  • An outdoor place's sides. Each side of a street, a lane or a square is, by the compass, Open, a Building front (with its stories), a Wall, a Fence, water, or another place it meets. A side nobody set reads as the plan shows it (a room against it is a building front, the water along it is water, else open), so a plan from before 0.39 looks as it did. A building front holds doors and windows: a fire door painted shut goes in the lane's front, not in the air.
  • "Outdoors but has walls" now flags only a wall drawn where a side is open. A building front, or the wall at a dead end's blind end, is never flagged.
  • Floors. A plan can have a basement, the Ground floor, the 2nd, the 3rd and up (numbered as in the US: the floor above the ground is the 2nd). Places, walls, doors and windows, things and lights each sit on a floor. A floor is 3 m high unless the plan says otherwise. Stairs, a lift, a ladder and a fire escape join floors; stairs and a ladder go up to the next floor, adding it if there isn't one. A floor with something on it, or with anything above it, can't be removed until that is moved; the ground floor always stays.
  • The Plan check knows floors. Rooms overlap, and doors double, only on the same floor. A floor with a room on it that no stairs, lift or ladder joins to the ground is red: No way up to the flat, with Add stairs. What the place's brief puts at a height must be on that floor, and so must what the script puts there once the plan has floors: No fire escape in Bakery Lane on the 3rd floor, with Add it (its landings up to that floor, and a ladder from the ground).
  • The second look. When it finds the plan doesn't read as its brief, the yellow flag says so: Doesn't read as a dead-end alley yet: nothing on its sides, no blind end. Make it match its brief sets the sides, the size and the floors the brief gives. Show and Not a problem work as on every flag. Once the plan matches its brief, the flag goes.
  • Ask or direct changes what's already there, free and read in code, each step a line in History with Undo:
  • turn the wall 45°, make the lane narrower, move the bench 2 m east (by the plan's north), rename the back room to Kitchen (the plan's name; the script's heading and the location keep theirs), make the front door a sliding door, make the lane's buildings 5 stories;
  • a thing is named by its place (the bakery's counter), by what it is (the neon, the shop), or as it for the one selected. When more than one could be meant, it asks, Which lamp? There are 3 on this floor, outlined now. Click the one you mean, then say it again.;
  • counts are kept: three trees along the waterfront adds three, in a row along the water's edge, and new things never land on something already there;
  • floors and sides: add a floor above the shop (a room over it, with stairs up), put the back room upstairs, a fire escape on the west side of Bakery Lane, up to the 3rd floor, make the east side of Bakery Lane a building front, 4 stories, make Bakery Lane 4 m wide.
  • Undoing a change to an OK'd plan (⌘Z, the toast's Undo, or History's) puts back, in one step, the plan, the Made from the earlier plan flags the change set, and the OK, since the plan is again what you OK'd. Redo makes the change again, with its flags.

The plan editor in 0.39: floors, sides, turning and full names (§49)

  • The floor buttons sit at the top left of the plan: + Floor, then each floor from the top down (3rd, 2nd, Ground), the one you're on filled; on a phone they run in a row along the top. Click one to work on that floor: only its places and things are drawn and can be picked. The floor below shows faintly under it, and so does the ground floor, so a landing over the lane shows where the lane is. On the ground floor, a fire escape or a balcony above is drawn dashed, once, with its floors on hover (Fire escape above: 2nd, 3rd floor). + Floor adds the floor above the top one and takes you there, with Undo. Switching floors writes nothing.
  • Add ▸ Floors: stairs, a lift, a ladder and a fire escape. Whatever you add goes on the floor you're on. Stairs and a ladder go up to the next floor, adding it if there isn't one; they're drawn going up where they stand and down where they arrive. A selected place has On the floor to move it to another floor. Show on a flag about a floor (No way up to the flat) goes to that floor.
  • Its sides. Select a street, a lane or a square: Its sides lists North, East, South and West, each Open, Building, Wall or Fence, with − and + for a building front's stories. A side nobody set shows what the plan reads it as. Once a side is set, the place's sides are drawn as set: a building front as a wall labeled building front · 4 stories outside it, a fence dashed, an open side the dashed edge. Each choice is a line in History, with Undo.
  • Everything turns. Select a wall you added: drag its ends to stretch it, or the round handle off its middle to turn it by whole degrees (Shift for 15° steps); Turn 90° and Turn are in its panel, with its length and angle. Furniture, lights, trees, water and stairs have Turn 90° beside their round handle.
  • Full names. A place whose name is shortened with … on the plan shows its whole name on a small tag while the pointer is over it or while it's selected, and in full at the top of its panel.
  • Ask or direct sends what's selected as it and the floor you're on: turn it 45° turns the selected thing, and the lamp is looked for on this floor. When more than one could be meant it asks Which lamp? There are 3 on this floor, outlined now. Click the one you mean, then say it again., outlines them in yellow and keeps your words: click one, then press Enter. Its examples come from the plan's own places and floors.
  • Redraw from the script (in the plan's top bar, and under the Assets tile) draws the plan again the way Lock now draws a new place. A click shows its price first (Free, for now), what it redraws (every place on that plan) and, on an OK'd plan, what that means; nothing changes until you say Redraw. Undo puts the old plan back.

Assets in 0.39: the character page, a description in two parts (§47 D)

  • Silver mirrors until there are pictures. A character, place or thing with no picture yet is a silver mirror with its name: its card in the list, the center and each look in the right column.
  • The picture is held to about half the window's height. The prompt row (+ reference, Model, Ratio, Angle) and the box sit directly under it, an empty picture or not.
  • One box: Full prompt for the model (0.63.5). It holds what goes to the model: the description as it is now (with Wearing … for a look), or, until there is one, the script's own words (Emina: in her 30s.), then Tarkovsky Director's lines (the angle's view, the plain gray background, a look's This is Look 2 · Outside; keep the face identical to the reference., a plate's camera, no text). Above the prompt, the line naming the attached references, which follows them. With nothing typed, the box keeps following the description. Type in it and Generate sends exactly what's there, for this picture only, in seconds and with no Brainstorm: capitalize a word, add @ and a name (the list writes the tag, or type @Emina whole) and that picture comes in as a reference, delete the tag and it goes. Back to the studio's prompt returns to the studio's words and Back to your edit undoes that. Since 0.64, a character's angle line, the plain gray background line and a look's line show in the box as fixed lines, marked Always sent, so the sheet stays consistent: they keep the sheet consistent, so they can't be edited or taken out. Everything around them is yours to type in. A picture made from your edit opens on that prompt, so the next change starts from it.
  • One Brainstorm, on the front. The silver Brainstorm sits just left of Generate, on a look's front (a place's master). The other angles say Made from the loved front. Brainstorm is on the front.: they're made from the loved front, and their box can be changed by hand for that one picture without touching the description. Brainstorm changes the description, so every picture that follows; the box changes one picture.
  • In every scene is the Default. A description holds who they are, as seen: age, build, face, hair, how they move, and what the script says they usually wear. Never where they are, what they're doing, the light, anything that happens within one scene (flour on her hands goes in that shot's words) or their voice.
  • Looks are numbered. + Look opens Brainstorm on a new look: Look 2, then Look 3 (a number is never given twice, even after a look is deleted). Its name is optional (Look 2 · Outside), on its tile and in Brainstorm, and its scenes are ticked from the character's scenes. The header reads @CHAR_Emina · Look 2 · Outside · sc. 4. Brainstorm never adds a look by itself. Numbers are for a character's looks only: a place's and a thing's states keep their names (Night, After the fire).
  • An older film's looks (0.39.4). A Default look written before 0.39.3 becomes Look 2, with the scenes it had, so nothing is lost; the Default is then the description alone, and the front is made on gray from it. The older looks follow in the order they were made (Look 3 · Outside), their names, tags and own lines kept. Opening changes nothing; the first change you make to that character stores it, and a description saved then flags what was made from the old Default look.
  • The box follows it. As soon as a description is saved, the box shows the words from it, with the words that changed marked for a moment.
  • The note. Once a description has words, a note icon sits on the picture (in the list and the center) and on each look. It opens the description, with Edit (a quick typed fix in labeled boxes) and Brainstorm, and a spark beside each part to brainstorm that part alone. Opening it writes nothing.
  • Changing a saved description (by Edit or Brainstorm) lists what was made from it: Front picture · Storyboard stills 4A, 4B · Take 4A TK01, the pictures, stills and takes in use that show them in the looks the change reaches. A change to In every scene reaches every look; the Default look reaches the looks that wear it; any other part, its own look. Then:
  • Save and flag them: free. Each keeps its picture and shows a yellow flag, Made from the earlier description, with Remake. On the Storyboard the still's tile carries it (open its panel to make it again); in Dailies, Edit and Export the take's flag does (Make it again on the Storyboard); in Assets the picture's tile does, and selecting it shows Tarkovsky Director's prompt from the new words, so Generate makes it again from them.
  • Save and remake all · about N credits: its price shows first. The pictures are made again from the new words, the face first and the others from it, each held at its own price; then the stills and takes made from them are made again with the new pictures, each held as its picture lands. A picture that fails stops what waits for it, and nothing is held for those. An uploaded picture isn't remade from words: upload a new one, or make one on the desk.
  • Nothing is deleted. The toast's Undo (or the line in Assets' History) puts the old words back and takes the flags off.
  • No description yet. Brainstorm opens on the script's own words (In her 30s.). When Tarkovsky Director runs the film, it writes In every scene itself before it makes the picture (within its budget), never a look, and lists it in the morning report under What was made.
  • A description request in Ask or direct (0.39.3). On Assets, give me a more in-depth description of the Man (or describe him in more detail with him open) is his description, not the script: Ask or direct says so, and Enter (or Brainstorm the Man's description) opens Brainstorm on his description, In every scene and his looks, with your words in its composer. Nothing is sent or charged until you press Send there; Use this saves it, with Undo. Only a request that asks for the script itself (change scene 1…, in the script…, his dialogue) changes the script from Assets.
  • Final Draft's Character description. A Final Draft script note of that kind is offered on its character's page: From Final Draft's notes: …, with Use it (Brainstorm opens with the note's words as the request, to split into In every scene and the looks; nothing is sent until you press Send) and Not now (a line in History, with Undo).

Assets in 0.38: the floor plan is made, checked and OK'd here (§46)

  • The Floor plan tile sits at the top of a location's right column: a live thumbnail of the plan (its places in their places, turned and shaped, its doors and windows as dots, the big furniture, the water and the trees), its state, and Open. Places that join share one plan, so the Bakery, its Back room and Harbour Road outside show the same tile: Bakery · with Harbour Road. The state reads Proposed at Lock · 4 to check (yellow while there's something to check), Proposed at Lock · ready to OK, OK'd 19 Oct, or OK'd 19 Oct · changed since when an older version of the studio changed it after the OK. It replaces the map button beside + Area. Opening Assets, the tile or the plan writes nothing.
  • Shaping places. Click a place to select it. Drag it to move it. Drag its round handle to turn it by whole degrees (Shift for 15° steps), or type the number in Turn on its panel. Drag any of its eight handles to resize it, along its own sides when it's turned. Its walls, doors, windows, furniture and lights go with it. The panel on the right has Room, Outdoors or Partly open, and Change to: Rectangle, Square, L-shaped, U-shaped, T-shaped, Corridor, Round or Oval for a room; a street, a square, a courtyard or open ground outdoors. Below that are its size, Turn 90° and Delete. Deleting a scripted place only takes it off the plan; its location stays in Assets.
  • Snapping. A place snaps to another's nearest edge within 0.35 m, side by side or lined up, with a guide along that edge. Shift snaps from 1.2 m; ⌘ moves it freely. Every kind of place snaps, outdoors and water too. A turned place snaps to places at its own angle. Counters, shelves, tables, benches, beds and ovens snap to their room's walls and to each other; chairs and lights move freely. Snap in the top bar (or S) turns snapping off.
  • Doors and windows stay in their wall. Drag one along its wall to slide it, or into another wall within 1.5 m. Drag it further and it comes free, and the Plan check flags it. Drag its ends to make it wider or narrower. Its panel says what it joins (Between Bakery and Harbour Road) and has Change to: Door, Double door, Sliding door, Swing door, Archway, Window, Shop window or Opening, plus Gate, Steps, Plank and Crossing where a side is outdoors. Then Hinged on (This end · That end), Opens into (either place, or Both ways) and Works by (Handle, Knob, Push bar, Push). A value Tarkovsky Director guessed stays yellow until you set it.
  • + Add opens tiles by kind: Spaces, Openings, Walls, Furniture, Nature, Lights. Click a tile and a door or window goes into the selected room's longest free wall; anything else goes to a free spot. Or drag a tile onto the plan: a door or window shows a line on the wall nearest the pointer and drops into it. On a wall two places share, it belongs to the side you let go on. Whatever you add is selected.
  • Round and oval rooms. Round and Oval are in + Add's Spaces and in Change to. A round room stays as wide as it is deep. A door or a window stands flat across the curve, with the wall stopping at its sides. When a room turns round, its windows go to the nearest wall. Cameras and people stay where they were, so one in a corner of the old room stands outside the wall until you move it.
  • Curved pieces. Curved bench and Curved steps are in + Add's Furniture. Let one go near a round or oval wall and it follows that wall, its back to it, and steps climb toward it. An oval is tighter at its ends, so a piece takes the curve of the wall where it lands. Drag it and it goes round the wall; hold ⌘ to place it freely. Anywhere else it takes a gentle curve. Curve on any piece's panel sets the radius in meters; 0 is straight.
  • Copy, paste, duplicate. ⌘C and ⌘V copy a piece, a light, a thing or a free-standing wall, and ⌘D duplicates it beside the original. A curved piece goes on round its curve. Each is a line in History, with Undo. A room isn't copied: it's a location with a name in Assets and the script.
  • One room, every shot. A piece you move, resize, turn, rename or remove here changes in every scene set in that room, so Frame it, the sketch and the blockout show it. A piece a scene moved on its own keeps that difference. A scene that has fewer of a piece than the room, or where the studio can't tell which one it is, keeps its own as it is.
  • Lights. A light goes where you put it. What it is comes from the script's words for that place: Bare bulb · from the script · sc. 6 in the Back room, the street lamp on Harbour Road. It is… picks another (Neon sign · your choice), and your pick sticks when the light moves. Go by the script goes back. The sun and the moon follow the scene's time and the plan's north and are never placed by hand.
  • Light and dark. The plan follows the studio's theme: in light, paper rooms, ink walls and a faint grid. Names, furniture and lights keep their size on screen at any zoom: a place's name sits in a corner nothing covers, shortened with … when no corner has room (the full name on hover); a piece too small for its name shows it on hover. Grid, door and window lines stay hairlines; walls keep their real thickness. A light's glow stays inside its place, and two lights Tarkovsky Director places never sit in one spot.
  • North is the compass in the plan's corner: drag it (15° steps; Shift for 1°). Every place on the plan shares one north.
  • Every change is a line in Assets' History, in its own words, with Undo. ⌘Z and ⇧⌘Z step back and forward. History in the top bar lists this visit's steps and the plan's earlier ones. Delete or Backspace removes what's selected. Esc closes + Add, then the selection, then the plan. Drag an empty spot to pan, and scroll to zoom (pinch on a phone). On a phone the panel goes under the plan and the handles are larger.
  • Plates and stills wait for the OK. Until the plan is OK'd, every Make for those places says Waiting for the floor plan · Open it; Open it opens the plan here, from any page.
  • The Plan check is in the plan's right column, under what's selected, and runs as the plan changes. A red flag must be fixed or waved off before the OK; a yellow one can stay. Each flag has its fix as one button (Make them one door, Join them at a door, Add the way through, Move them apart to share a wall, Put it in the nearest wall, Take the walls away, Add it); a fix that needs a choice asks first (Which way does it open?), each answer one click. Show outlines what the flag is about in its color: both doors in red, a room in yellow. Not a problem waves it off, red ones too; waved flags are counted under the list (2 waved off) with Bring back. A clean plan says Everything checks out. Every fix, wave and Bring back is a line in History with its Undo.
  • From the template. Tarkovsky Director builds the plan from a template for the kind of place (a shop with a back room, a flat, a station). A space the script never goes to is drawn faint, not in the script, with a row in the check: Keep it or Remove. It still counts for what a camera can see.
  • OK the plan is in the plan's top bar, beside its state. With red flags left it says so under the bar (2 red flags · Fix them, or mark Not a problem. · Keep checking) and nothing is written. With only yellow left, or nothing, it OKs: Plan OK'd. Plates and stills use it now., one line in History, with Undo (Take the OK back). The OK is the whole map's: every place on it reads OK'd 19 Oct.
  • Changing an OK'd plan asks first: This plan is OK'd. Change it? When stills or plates see the change, it lists them with their pictures; Change it keeps them and flags each Made from the earlier plan · Remake (nothing is thrown away or spent), Remake them is priced first, Cancel saves nothing. The plan stays OK'd at the change, unless the change raises a red flag: then the OK is taken back in the same line and makes wait again.
  • Join at the door. An older plan whose two places sit apart with two doors in one doorway shows it once, as a red flag in the Plan check (Two doors in the same place), with Join at the door as its fix. A doorway no flag names gets a line under the top bar instead: Bakery and Harbour Road sit apart, with two doors in one doorway · Join at the door. It's only offered: nothing changes until you click. The click makes the two doors one, moves the places together at that door, and gives them one north, as one line in History with Undo. When the two doors swing different ways (or the norths disagree), it asks first, each answer one click: Which way does the front door open? · Outward onto Harbour Road (the shop's) · Inward into the Bakery (the street's).
  • Ask or direct, along the plan's foot, shows examples from your plan's own places, and takes plain words, read in code, free, each step a line in History with Undo: put the storeroom door between it and the bakery (the Storeroom moves to meet the Bakery along the longest wall they can share, its door in that wall), add a café across the road (with its door on the street), make the back room L-shaped, widen the shop window (a meter, unless you say how much), a tree on Harbour Road, a candle in the back room (your choice of light), add a lamp to Harbour Road (what the script says is there: the street lamp). it and there mean the place named last, or the one selected. Several steps can go in one line (a bench on the road, then a tree on Harbour Road). Words it can't read as a step offer Draw it on the plan when they describe rooms, with its price first (the paid turn of 0.26.2, unchanged); otherwise it says That isn't a plan step I can do here, with what it would need.
  • A location with only a scene's plan (0.71.1). When Lock found a scene's floor plan already drawn for a location, it drew no second room for it. The plan window now shows that scene's room, so a door or a piece you add there shows where you put it, in the window and in Frame it alike. Before, the window showed an empty box while each door went to the scene's plan.

Assets in 0.37: places that aren't rooms (§45 B)

  • Each area of a place has a kind: a Room (walls, doors and windows), Outdoors (no walls: a street, a quay, a field, a beach) or Partly open (some walls and open sides: a courtyard, a porch, a covered market, a ferry deck). Tarkovsky Director proposes it from the scene heading and the words: EXT. FERRY QUAY is outdoors, INT. BAKERY a room, a porch or a courtyard partly open (a porch with a roof, a courtyard open to the sky). CONTINUOUS or LATER never changes it, and INT./EXT. stays a room.
  • An outdoor area's edges are building fronts, water, curbs or open ground. The Floor plan draws it as ground with no walls, its kind under its name: a building front is a heavy line (the bakery's shop front), water a blue band beyond the edge, a curb dashed, open ground nothing. A plan drawn before 0.37 keeps what it stored; an outdoor area still drawn with four walls is read as its edges.
  • A building front carries the inside's doors and windows. The bakery's front door on the street is the same door as the one in the bakery's wall, and its shop window shows on both sides. The street meets the bakery's wall, so walking out through the door is one path on the plan.
  • Every door has its details: the side its hinge is on (told from the side you come from), which way it opens (a swing door both ways), and how it works (a knob, a handle, a push bar, a push with no latch, or sliding). Stairs and ramps read UP or DOWN from each side. What the words say is used; what they don't is Tarkovsky Director's guess and shows yellow until someone sets it.
  • Joined places agree on north. Turning one place's north asks about the place it's joined to (turn it too, or keep it), with the stills each would touch; two joined places whose norths disagree by more than 5° get a yellow line on the plan.
  • A scene that follows on into a room (INT. BACK ROOM - CONTINUOUS after someone pushes through a door into it) is proposed as an area of the place it follows on from, shown as Tarkovsky Director's proposal; say otherwise and it stays its own place, even at the next Lock.
  • In the Viewfinder, an outdoor area is ground with the sky above; a frame whose camera stands past a door builds the area beyond it, with that door open on its hinge, and takes that area's plates.
  • A take of a shot that crosses a door (its camera, someone's move on the plan, or its own words) is told how moving from one space to another works, and the door itself from the plan (The bakery's front door is hinged on its left and opens outward onto the street.); every other take is sent as before. From 0.38 it is also told who works the door, and how, in Zach's two forms: The bakery's front door is hinged on its left and opens outward onto the street; Emina pushes it open with her free hand. and The swing door is hinged on its left and swings both ways; Zibelda pushes through it with her shoulder, the tray in both hands. From 0.38.2, in every form Zach OK'd on 20 Oct: a pull (Emina pulls it open with her free hand., or Emina pulls it open. when no hand is said), a push with no hand said (Emina pushes it open.), a push with the shoulder (Emina pushes it open with her shoulder, the crate in both hands.), a swing door with a hand free (Zibelda pushes through it with her free hand.), a sliding door (… slides along its track; Emina slides it open with her free hand.), and closing, when the shot's words say the door closes: Emina pulls it shut behind her. for a door she pulled, Emina pushes it shut. for one she pushed. A door with steps keeps its sentence without the clause, and so does a way of working a door Zach didn't OK (a swing door with no hand said, a sliding door without a free hand).
  • From 0.39 the door closes behind them by default. Zach's rule: When a shot shows someone going through a door, they close it behind them, unless the shot or the script says it's left open. From 0.39.3 the door sentence opens and closes in one go, in Zach's words: …; Emina pushes it open with her free hand and closes it behind her. (or pulls it open, or with no hand named, pushes it open and closes it behind her), …; Emina pushes it open with her shoulder, the crate in both hands, and it swings shut behind her. when her hands are full, …; Zibelda pushes through it with her free hand, and it swings shut behind her. for a swing door, and …; Emina slides it open with her free hand and slides it shut behind her. for a sliding door; with no hand named, …; Zibelda pushes through it, and it swings shut behind her., …; Emina slides it open and slides it shut behind her., and with a shoulder on a swing door, …; Zibelda shoulders it open, and it swings shut behind her. The name and the pronoun are the person's in the shot (her, him, or them when their sheet says neither). A door with steps keeps its sentence. When the shot's words or the scene's action leave it open (leaves it open, propped open, leaves the door ajar, the door stays open, without closing it, and the like), or more than one person goes through, only the opening half is said; when the shot's words close the door, its closing sentence stands. Films made before 0.39 read the new sentence too.

Assets in 0.35: every angle of a person, and each profile checked before it's loved

  • Two profiles. A person's Left profile and Right profile are two angles, each with its own heart in each look. The left one is the profile Tarkovsky Director made before 0.35 (its prompt makes the face look frame left). The right one is made with the same profile words and the face line Emina faces frame right., and a model reads it as Emina · character · right profile (0.37, Zach's yes; until then it waited for the prompt session and a frame of that side sent the front). Neither is ever made by flipping the other: a flip moves a hair parting or a scar.
  • Loving a look makes the other angles. When you heart a person's image, a small window shows the total first: + the other 4 angles · about 36 credits, with the angles it makes (three-quarter, left profile, full body, back, whichever the look has no image of). Love and make them (Enter) loves it and holds every angle at once at that price; Love only just loves it. A look whose face is in already shows the same line under the image with Make them. Each angle is made from the loved front by the desk's own prompt and lands in its tile as it's made; one that fails gives its credits back, and you can make it again. If your three job lanes are busy, the rest wait on their credits and start as a lane frees.
  • A cheap draft. The kickoff asks Every angle of a person, and Project settings change it: Make every angle when a look is loved (the default) or A cheap draft: only what I make. With the draft, loving a look makes nothing else.
  • Marks and sides. A person's sheet has a Marks and sides line (in Details and on the full sheet): anything on one side only and which side, scar through his right eyebrow, parting on his left. It is the deciding source when images disagree.
  • Check it before it's loved. A made profile shows the line beside it with Matches the marks and Doesn't: remake · about 9 credits. A profile is loved only once it matches: its heart waits for the check, and a tile still to check has a yellow ring. Doesn't: remake takes the image out of that side (it stays in Alternate versions, so no still uses it) and makes it again at the price shown. Each other angle a loved look makes gets the same check, offered. Each check is a line in the Assets History, with Undo. Tarkovsky Director never loves an unchecked profile, and can't check one: a person's check is enough today.
  • Tarkovsky Director checks it too (0.37). As each angle Tarkovsky Director makes lands (the other angles on Love, a profile made first for a shot, the desk's own Generate), one cheap vision call checks it against the marks and sides line and the way it should face. Its price is inside the angle's: + the other 4 angles · about 37 credits includes the checks, held with the images and settled to what each costs. When it says remake, the strip turns yellow with its reason (Tarkovsky Director's check says remake: The scar is over her left eyebrow; the line says right.); when it finds the marks on their sides, the strip says so, and your Matches the marks still loves it. It runs when there is something to check: a marks and sides line on the sheet, or a profile's way to face. If the image fails, nothing is checked and every credit goes back.
  • Made meanwhile. A profile Tarkovsky Director made first for a shot fills its angle at once, so the next stills of that side use it too; its check is still yours to do on the desk.

Assets in 0.30: rooms join the way reality does, and you decide

  • How two rooms join. Every join of a place's rooms has a kind: a door, an open side, an archway, a curtain (open or closed), a window or a wall of windows. The script's words decide (she slips through the bead curtain into the back room, the archway to the kitchen); when they don't, what is real for the two rooms: a bathroom or a bedroom has a door, a stage is open to its auditorium (the proscenium), a kitchen is often open to the dining room, a living room meets the garden with a wall of windows, a room onto the street has a door. When neither says, Tarkovsky Director's guess is an open side: Lock never adds a door the script doesn't mention. Hover a join to see what decided it.
  • Change it. On the Floor plan here, or the Storyboard's floor plan pop-up, click a join (its opening in a room, or the line between two rooms) and pick its kind. Both rooms draw it, in every plan of them (a door with its leaf, an archway with its posts, a curtain across the gap or gathered at its sides); a name Tarkovsky Director gave follows the kind. ⌘Z undoes; once stills exist, the change says what it affects first.
  • What a kind shows. An open side, an archway, an open curtain, a window and a wall of windows show the next room; a door and a closed curtain hide it. The pop-up's Through the… box shows the room beyond; so far only glass is said in a still's words (the rest waits for the prompt session).
  • North, narrowed. Turning north affects every exterior frame, and an interior one only when a window or an opening to the outside is in view, or the plan says the light comes through one (a light that names its window, a skylight).
  • Remake them prices each still with its check. A remake that passes it takes the place of the still it remakes, which stays as an alternate, like a heart change; one line in the Storyboard's History undoes the whole batch. The master view a change touches is listed too, The ferry deck's master view: remake in Assets, with a button that keeps the change and opens it here (every side turns from it).
  • Older plan. A version made under an older plan than the plan now carries a yellow ring (Made under an older plan, with what changed since on hover); choosing it asks first.
  • Plan not OK'd yet shows, quiet, in a still's or a background's price line before the first one is made in a place whose plan isn't OK'd. It never blocks; click it to open the plan here. From 0.38 it does block: every Make of a plate, a still or a take for that place reads Waiting for the floor plan · Open it, and nothing is held until the plan is OK'd (see Assets in 0.38).
  • History. Every change to a plan is a line in the Storyboard's History (and here): Keeper's Cottage: the piano was added, with its Undo, refused once that part changed since. Each still records the plan as it was when it was sent.

Assets in 0.30: a look from before 0.25, and a back made for a frame

  • A look from before 0.25 with several images and no hearts now sends only one of them: the image that best fits the angle the frame pulls. That is an image filed under that angle on the desk, else the look's first image (the full body Tarkovsky Director made it as). Its other images stay home. The look's chip on the desk carries a yellow ring, with Heart one image per angle so Tarkovsky Director knows which to use on hover. Heart one image per angle and the note goes.
  • A back made for a frame. When a frame needs someone's back and none is made yet, the Storyboard makes it first, inside the frame's price (see the Storyboard). It lands here, in that look, as the back's heart, and every frame that shows the person from behind pulls it from then on.
  • Where a place's plate goes when the references are full (0.30): after the people, ahead of the things the frame names and what they wear. Before 0.30 it went after them.

Assets in 0.28: every place has its Floor plan, adjusted and OK'd here (addendum §39)

  • Floor plan (the map button beside + Area on a location's card) opens the place's plan: every area drawn as its room, joined by its doors and openings, with its windows, fixed furniture and lights. It is the one plan everywhere: the Storyboard's floor plan pop-up, New shot and the Shot List draw the same rooms. The button shows a tick once the plan is OK'd; its hover says who OK'd it and when.
  • Proposed at Lock, free. Lock draws the plan of every place before any picture is made: each area's room from every scene set there (the doors people come in by, the windows the action looks through, the stove, the table, the bunk people sit or lie on, the lamps, candles, signs and fires), its doors to the place's other areas, and north. A part the words put on a wall (a counter at the back) goes there; the back is the wall the master looks at. Hover a part to see what placed it (scene 2's words: “…”). No model is called; nothing is charged.
  • North. The compass in the plan's corner shows where north is, with the sun and the moon of the place's scenes on its ring (Dawn: the low sun). A sun clue in the script sets it: the morning sun comes in through the window puts that window on the wall the morning sun shines on. With no clue, north is up. Drag the N to turn it (in 15° steps; hold ⇧ for single degrees), or use the two turn buttons: the sun and the moon of every scene here move with it, so the light falls from the new side in the next stills. The plates keep their names (the master looks up the plan).
  • Change it as in 0.26.3. Drag a door, a window or a piece of furniture to move it, drag its dot to turn it, Delete removes it; ⌘Z and ⇧⌘Z undo and redo. Click a room to pick it, then + Door, + Window, + Furniture or + Light adds one there, in every plan of that room (name it: the door to the yard, the porthole, a piano). + Area adds a room, joined to the main one by a door.
  • OK the plan marks it approved, with today's date and your name (OK'd 16 Oct by Ana). Change it afterwards and the card says changed since. Take the OK back undoes it.
  • Nothing waits for an OK. A still or a background made in a place whose plan isn't OK'd is made with Tarkovsky Director's plan. Since 0.30 the price line says so before the first one (Plan not OK'd yet; click it to open the plan here); after the first make it goes quiet for that place. From 0.38 makes wait for the OK (see Assets in 0.38).
  • A plan can break the rules on purpose: no roof, a door to nowhere, two norths in a dream. The plan keeps what you draw; the checks follow the plan as drawn.
  • A change says what it affects first. Once stills exist, moving a door, adding a room or turning north first says which stills and backgrounds it touches: the stills whose camera sees the change (each still remembers the plan and the camera it was made with) and the backgrounds facing it: Moving this window affects 1 still in 1 shot (1A) and 1 background, with their pictures. Remake them · about N credits holds exactly that price and makes each again (a still as a new version of its frame, its check in its price; a background as a new side plate from its master; since 0.30 a still that passes its check takes the old one's place, the old one an alternate). Keep them as they are saves the change and flags them, Made before the window moved, on the Storyboard; ⌘Z, or its line in History, takes the change and the flags back. Cancel saves nothing. A change that affects nothing just saves.
  • The master itself isn't remade from here: every side turns from it, so remake it with its angles here, then its sides.

Assets in 0.27.4: a look and a state for each scene, the same everywhere

  • One rule picks a person's look and a thing's state for a scene, for its stills, its takes, the still check and whether a shot is ready: the look whose scenes include it; else the look named by the scene's state of the person or thing (what Lock and the Breakdown record for the scene, such as Hanging · stage bar), compared without case, spaces or punctuation; else the latest look begun before it. The order of the looks on the sheet never decides. Before 0.27.4 a take, and the shot's readiness, didn't read the scene's state, so a look named by it could go to a take of another scene.
  • A look with no image yet for a scene: its stills and takes are sent the person's own images, and the shot asks for that look (Pip · Hanging · stage bar look), never another look's image.
  • Two looks of one name for different scenes are fine: each scene gets its own, and the still check is told which is the frame's.

Assets in 0.27.3: a place's plate for the scene's state

  • The plate of the scene's state is the room. A still, a take and the still check of a frame in a scene whose place is in a state (EXT. FERRY - DAWN) use the place's plate for that state: the plate hearted in its Dawn bin. When the place's sheet records the state with its own master image, that image counts too. The loved plate with no state still covers the state of the place's first scene, as before; a state with no plate yet sends nothing for the place and says Ferry has no plate for Dawn yet, so the still never shows the room in the wrong light.
  • Where it goes when the references are full. The plate ranked after the people, the things the frame names and what they wear (since 0.30 it goes right after the people: see 0.30 above). When those fill the model's references, the plate is left out and said: the Storyboard's frame panel shows Ferry · no room (5 of 5, the still takes 4), Dailies' Stills tab says Left out, the references are full: Ferry, and the Shot List's frame card offers the model that takes more. On that model it goes. The panel lists the references of the model chosen in it, not four on every model.
  • The still check compares the right room. A frame's room is the plate of its scene's state (or the set reference), whether or not the still's job carried it; sent says whether it did.

Assets in 0.27.1: Other names shows names only

  • An old spelling of a tag is hidden (Zach's answer 18). When a Lock changes how a tag is spelled (@CHAR_D_ARCY became @CHAR_DARCY in 0.26.3), the old spelling is still kept with the sheet, so a prompt, a cue or a line direction written with it still finds the person or the thing, and the @ list still matches it. It no longer shows as a chip under Other names, and it can't be removed there: the chips are the names the script uses (the landlady), with × and + other name as before. A tag typed into + other name isn't taken as a name. On a Character line in Story, the old spelling isn't offered either.

Assets in 0.26.1: the remakes say where they stand, and the ratio is the image's

  • After Use it and remake…, each row of the pop-up says where that remake really is: being made, made · replaced (the angle took the heart, the frame replaced the old one, the take is the loved take), made · waiting on its check (2 to fix) for a remade frame whose still check found something (it doesn't replace the frame until its check is clean), with Open to see it on the Storyboard and love it anyway or remake it, made · being checked, or failed · nothing charged (or what was charged, if anything).
  • The Ratio picker follows the image you select: the ratio it was made at (a 2:3 portrait is 2:3, whatever the film's ratio), and an upload's own shape.
  • A tag typed in capitals in any prompt (@CHAR_WENNA) is matched to its asset in any casing and sent once as Tarkovsky Director writes it (@CHAR_Wenna); a look's tag (@CHAR_WENNA_RAINCOAT) too.

Assets in 0.26: one card per place, and @ in every prompt (addendum §35 C, E)

  • One card per place. Locations shows one card for each place (the Ferry), with the hearted master of its main area; its areas show on hover. A click opens its main area. A place's areas are the parts of it the script writes (INT. FERRY - CABIN is the Ferry's cabin, EXT. FERRY - DECK its deck, INT. FERRY the Ferry itself). Locations counts places.
  • Its areas, like looks. Above the looks bar, the place's areas: each by its hearted master, with its name and its states (Deck: Day, Night; Cabin: Night). Click one to open it. Each area has its own looks bar (its states), its own angles (master, reverse, left, right) and its own Alternate versions, and its own tag (@LOC_Ferry_Cabin).
  • + Area, next to + State, adds an area to the place: type its name and press Enter. It has a tag at once and no picture; nothing is made or spent until you make its master.
  • A place with one area looks as before: its own card and its looks bar, nothing more.
  • @ in the prompt lists every tag, with its hearted picture and its kind: the tags with a word that starts with the letters you type first (@fe lists every area of the Ferry), then any tag that contains them; a plain @ lists all. Click one, or use ↑ ↓ and Enter or Tab: the tag and a space are written, and its picture goes with the image as a reference. Esc closes the list and nothing else. An asset's other names find it too, and write its tag.
  • + New: 'fe…' is the list's last row: it asks whether it is a new character, element or location, and adds it to the cast with that name and its tag (no picture, nothing spent); the tag goes where the letters were.

Assets in 0.25: a desk that leads with faces (addendum §32)

Three columns: the cast on the left, the work in the middle, the asset's looks and versions on the right. Only images made or uploaded in Assets are here; Storyboard and Dailies stills stay on their pages.

  • The cast. Characters, Locations, Elements and References (a commercial's kinds), each with its count; search (by name, tag or look; CHAR_ every character, LOC_ every place); + New. Each card is the hearted face of the asset's first look and its plain name (Mira, not CHAR_Mira); its tag, description and looks show on hover. A click opens its base look.
  • The work. One line: @CHAR_Emina · Look 2 · Outside · sc. 4 (the Default: @CHAR_Emina · Default · every scene; 0.47: the name, then Look 2 · Outside · sc. 4, see above) and Details (the tag, the name, the voice, the scenes, the other names as chips; a look's age, hair, wardrobe and costume pieces; a place's room and landmarks, corrected there, and Open the floor plan; Full sheet for the earlier tools). The viewer fills its height: a portrait reaches the top and the bottom, a wide image fills the width. The heart and the like sit on the image; Expand (or F) opens it full-window. Under it, one line: the image's name, its angle, and what its heart means (♥ @CHAR_Mira_RED_SCARF pulls this for the front).
  • The box is Full prompt for the model: the whole prompt from the description, as sent, and you can change it for the picture you're making (0.63.5; a brand or a reference keeps its whole prompt). Above it: + reference, Model, Ratio, Angle, and the references in use (hover one to take it out). The cost, Brainstorm (on the front) and Generate sit at its bottom right (Cmd+Enter). Generate lands in Alternate versions, unless its angle had nothing yet: then it fills that angle.
  • The looks bar. Every look in story order, each by its hearted face (the front for a person, the master for a place), its number and name (Look 2 · Outside, the name editable on the tile) and its scenes (ticked from the character's scenes); the arrows step from one to the next. + Look opens Brainstorm on a new look, numbered; + State adds a thing's state (named, in Details) or picks one of a place's.
  • The open look. Its hearted image for each angle, in angle order: a person's front, three-quarter, profile, full body and back; a place's master, reverse, left and right; a thing's front, side and back. The missing angles follow as Make profile, Make left tiles: a click shows the cost, and Make makes it. A place's missing side of its master is made the way 0.24 made it: Tarkovsky Director describes the master once first, its price inside the plate's.
  • Alternate versions. Everything else made for that look, liked or not, newest first, slightly muted until you hover one. Upload sits at the end (a real person, a product, a brand or a logo asks for your tick first, §11); it fills the open angle when that angle is empty.
  • Hearts and likes, everywhere on the page. One heart per look and per angle: that is the image the look's @tag pulls for that angle. Heart a new image and the old one becomes a liked image in Alternate versions; the new one takes its place in the look, the looks bar and the card, and in what every still and take is sent. An alternate in the viewer is hearted for the angle set in Angle. Like marks a keeper, and belongs to the image wherever it shows.
  • Keys (Shortcuts lists them): ← → step through the versions (the look's angles, then its alternates); H hearts the image in the viewer; L likes it; F expands it; ? opens Shortcuts.
  • The title block (0.29), as on every page: the eyebrow (the project's type and the page, FILM / STORY and so on, since 0.33; your role is on the project-access button), Assets and one line under it. The page scrolls a little: once the title has scrolled away, the desk fills the window.
  • Gone from the page: the looks strip on the left, the set-pack panel, "What it looks like" (it's the prompt), "For" (it follows the look) and "Payment" (an account setting), the "Upload into…" row. The full sheet keeps its tools but no longer sets a look's scenes or where it begins: the looks bar shows them, and Details corrects the scenes.

Assets in 0.24: simple again, and continuity behind the scenes (addendum §31)

You tell the story, direct the shots and choose the assets and the takes; Tarkovsky Director keeps the continuity. Nothing on Assets asks you for it. What Tarkovsky Director decided shows under Details or on hover, where you can correct it.

  • The left panel. Three sections, Characters, Locations and Elements, one row per asset: a thumbnail of its hearted image and its plain name (Mira, not CHAR_Mira; the tag shows on hover and in the prompt). Click an asset and every image it has opens below it, in a grid under a small heading for each look or state (Default, Red scarf, Thirty years older; a place's Night; a thing's Torn). Each heading is that look's bin: its @tag is on hover, the heart on an image sets the image the tag pulls into every still and take, and a click puts the image in the viewer (and Generate makes the next one into that bin). The arrow beside a heading uploads into it. Click the asset again to close it. Search and the list/grid switch stay.
  • The viewer is sized to the image, with no bars either side: a tall portrait is narrow and the left panel gets the width. Details opens and closes with its button.
  • Other names the script uses come from the Breakdown, as small chips under Details (× takes one off). With none there's no empty box, just + other name.
  • Nothing in Details is cut off (0.61, TAR-375). Every field in Details (the name, the voice, marks and sides, a look's age, hair and wardrobe, a place's landmarks) wraps onto as many lines as its words need, up to seven, then scrolls inside itself; Enter still ends it (not the Enter that confirms a word in a Japanese or Chinese input method). A scene's heading shows in full, wrapped.
  • One costume, not two. A look and an element that are the same costume piece are linked by Tarkovsky Director: the look's Details lists the piece, and × unlinks it for good.
  • The set pack. The master always faces north: the reverse is south, the left side west, the right side east (the "The master faces…" menu is gone). Under Details a place shows its master and Make reverse, Make left and Make right, each with its price on hover. Before the first side is made, Tarkovsky Director looks at the loved master plate once (one cheap vision call, its price inside that plate's quote) and describes the room: its walls, what is built in, its signs and lamps (never their words), its dressing, and where the light comes from. That description goes with every side plate, so the room stays the same when the camera turns, and it shows under Details as The room, where you can correct it. A new master is described again. A pack made before 0.24 with another facing is shown turned so its master is north; every frame keeps the plate it had.
  • Make shows only what is missing (0.24, Zach's answer). A side that has its plate shows the plate, not a button: Make reverse, Make left and Make right appear only for the sides of the hearted master that are still missing (heart another master and its sides start again). A frame that faces a missing side says so in Check shot list, the still check and the floor plan check: … Click “Make reverse” among the place's angles in Assets. (since 0.25 the Make tiles sit among the open look's angles)
  • When the master can't be described, the sides wait. If the description call fails, or can't be priced, the click is refused: nothing is held, charged or queued, and the button says why on hover. Try again in a moment. The plates are never made without the description.
  • The full sheet no longer sets look ranges. A look's Scenes and Begins, and a state's scene range and start, are gone from the full sheet: the looks bar replaces them. Nothing is deleted: what a look or a state already says still decides what each scene's stills and takes get, and the arc still shows it.
  • Landmarks fill themselves, from the script's words and from what the master plate shows, each on its side (north is ahead in the master, west its left, east its right, south behind it). Correct a side or a name under Details, or take one off (it stays off).
  • The floor plan is drawn on the Shot List; a place links to it from Details once a scene of it has one.

When a heart changes: what was made from it (0.25, addendum §32 C)

Every image, still and take keeps the exact images its @tags pulled when it was made, and which look and angle each was. So the studio can always say what was made from an image.

  • One heart per look and per angle. The heart on an image is the image the @tag pulls for that angle. A close-up pulls the look's three-quarter, a medium shot its front, a wide its full body; a frame whose words see someone in profile or from behind pulls that angle; a place's frame pulls the side of the room its camera faces; a thing its side or its back when the frame's words show it. A take's references follow its first frame the same way. An angle with no heart of its own pulls what it pulled before.
  • One image per reference (0.28). A look sends its hearted images, one per angle. An image in a look that no angle's heart holds stays home, so it never takes one of the image model's reference slots. A person's other hearted angles, and the references attached to their sheet, go only once everyone and everything in the frame has its first image and the model takes more; each is then named with what it is (Ana · character · Winter coat · three-quarter, Ana · character · reference), so the model can tell them apart. No two references of a still or a take share a name. A look from before 0.25 with no hearts sent its images as before (its first as the full body, the others numbered, image 2); since 0.30 it sends one, the one that best fits the angle (see 0.30 above).
  • Nothing was made from the old image: the heart just moves.
  • Something was made from it: before anything changes, a pop-up shows the old and the new image side by side and Tarkovsky Director's comparison in plain words (the new image has no hat), marked Small change (light, framing) or Design change (a missing hat, another coat). The comparison is one cheap vision call; its price shows beside it. If it can't run, the pop-up says Couldn't compare and nothing is charged.
  • What was made from it, by kind and counted: other angles, looks built on it, storyboard frames (and how many are on the locked board), takes, clips in the cut, alternates. Something made from something made from it counts too.
  • Use it from now on (highlighted; Enter picks it): new work uses the new image; what is already made keeps its image and gets an older look mark, and no credits are spent. For a new front, that mark is the red out-of-date flag (0.63, above).
  • Use it and remake… lists what would be made again, each with its price, and the total. Locked frames have their own tick box, unticked. Nothing is made until you press Remake · about N credits. Each part holds its credits when it goes and settles like any generation; a frame made from another remade frame, and a take made from remade frames, wait for those to land. Each remake replaces the old one as it lands (a frame once its check is clean; a take becomes the loved take, and Edit offers it as Swap into the cut); the old ones stay as alternates.
  • Cancel changes nothing.
  • The older-look mark is informational, never must-fix: a ring among a Storyboard frame's dots, a small mark on the still or take in Dailies' bins and on the take and its clips in Edit, with the reason on hover. Tarkovsky Director may choose too; the change records who chose.
  • You can always switch back: heart the old image again and everything returns; the older-look marks clear by themselves.
  • The words follow the hearted image. When the new image contradicts the look's words or the script (the words say a felt hat; the new image has none), the pop-up asks: Update the words (Tarkovsky Director's rewrite, editable) or Keep them.
  • Scope follows the look. Changing a later look touches only its scenes; changing the base touches everything built on it, its later looks included.
  • Projects made before 0.25 have no such record on their stills and takes. The studio reads the record each job kept of what it sent, which is exact. With no job (a copy of a project), it goes by date where only that image could have been used; anything else it counts as unknown rather than guess. What the studio didn't make (an upload, an import) was made from nothing.

Assets in 0.22: a bin for every look and state, laid out like Dailies (round 10 addendum §23)

Assets has the same layout as the Stills tab in Dailies: bins on the left, the viewer in the middle, the prompt row under it, and the asset's details in a panel on the right.

  • The bins. Grouped Characters, Locations and Elements. Every asset has a bin, and inside it one bin per look or state: a person's default and each later look, a place in each state the script needs (day, night), a thing whole and in each state (torn). The bin's name is its @tag: CHAR_Mira, CHAR_Mira_RED_SCARF, LOC_Market_NIGHT, ELEM_Kite_TORN. Its images are named after it (CHAR_Mira_RED_SCARF_01), and a name stays with its image when the bin is reordered. A look or state with no image says needs its image. Search, the two views (names and thumbnails) and the expanding viewer work as in Dailies.
  • Heart and like. The heart marks the image the bin's @tag pulls into every still and take of the frames in that look or state: a person's default (the front of the character sheet), a look's first image, a place's loved plate for that state, an element's or a state's image. The image it replaces stays in the bin. Like marks a keeper. The first image made or uploaded into an empty bin is the one its tag pulls.
  • The prompt row. The box opens with a prompt drafted from the asset's description (and the look's or state's) as the Breakdown wrote it, and you can edit it: what is in the box is what is sent. @ in the box lists every asset and every look and state tag, and brings in that bin's hearted image; + adds a reference image from the project or an upload. Then, in one row: the model, what the image is for in the bin (a character's missing sheet angles come first, then a look's image or its clothes-only image; a place's plates; a thing's image), the ratio, the payment, the price before anything runs, and Generate, which lands the image in the open bin under its name.
  • Upload into the bin. An upload asks what the picture shows first. A real person, a product, a brand or a logo needs your tick that you have the right to use it (the same question as everywhere since 0.22); without the tick the image is kept in the bin but never sent to a model (a job that would carry it says it was left out).
  • The character sheet lives in the character's bin (Full sheet opens every tool of the earlier sheet: angles, looks, wardrobe, voice). The set pack lives in the location's bin, in the side panel. Since 0.24 there is one floor plan, on the Shot List: the panel shows Open the floor plan with a thumbnail of the scene's plan once there is one (drafted when coverage is made), and it opens the Shot List at that plan; the location's other scenes with a plan follow as small links.
  • Details, on the right. What it looks like, temperament, voice and other names for a person; hair, wardrobe and scenes for a look; what a state looks like and its scenes. A field you have not filled is empty with a hint of what goes there: no example or inherited text is shown as if it were the value (a look without its own wardrobe says, in its label, that it wears the default).
  • One costume, not two. When a look and an element are the same costume piece (a look named Red scarf and the element Red scarf, or a look whose wardrobe names the element), the panel says so with Link them: the look then wears the element, its image goes with the look's frames, and the element's bin says which look wears it.

Categories follow the project type

  • Films: Characters, Locations, Elements, References.
  • Commercials: Products, Talent, Locations, Elements, Brand, References. Talent sheets are character sheets (identity angles, looks, wardrobe, voice). Locking the script still creates Talent sheets from speaking parts; CHAR_ tags are kept.

Products (commercials)

  • Packshot. Upload the client's packshot on the sheet. It is attached as a reference to every generation of that product.
  • Label text. Type exactly what the label says. The badge "Checked on every generation" means: after a packshot still arrives, the writing model reads the image and compares the label with this text.
  • Turnaround. "Turnaround · estimate" quotes four angles (front, three-quarter, side, back) and, when label text is set, the label check per angle. The button then shows the total before anything runs. Three jobs run at a time; press again for the rest. Each angle can also be generated alone from its tile through Imagine.
  • Label mismatch. A still whose label did not match shows a red "Label mismatch" chip with what the model read. It cannot be loved until you press "Override". A still generated while the page was not armed (for example after a reload) shows "Check label"; the price appears before the check runs. "Re-check" runs it again.
  • A label check is quoted before it runs (about two credits ceiling with the default writing model, one image included; the usage receipt is what is charged and the rest of the hold is released). It runs on Tarkovsky credits; your own key is not supported for the vision step yet.
  • Love the packshot that goes into every shot of this product. Liked packshots are alternates.

Brand (commercials)

  • The Brand category page carries the brand rules with the badge "Checked on every shot". Rules are sent as text with every still and take of the commercial.
  • Draft brand rules. Estimate, then draft. The guidelines PDF from Project settings is read first (its text is extracted on the server; scanned or embedded-font PDFs cannot be read, and the note says so, in which case your typed notes are used). Drafted rules arrive as review cards with a category and a rule; Accept adds one to the project, Reject drops it. Up to thirty rules.
  • Brand assets (logo, type specimen, color chip) are images you upload or generate as references; attach one to an asset to send it with that asset's generations.

Looks and Arcs (characters and talent)

  • A look is hair, wardrobe, age and a scene range ("1-4, 9"). Add one when a character changes across the story.
  • The Arcs strip orders looks by their first scene. Pick a scene at the top of the sheet to see which look (and how many images) a shot there sends.
  • A look's images are the identity images for its scenes; without a look the identity angles are sent, front first. The references attached to the asset ride along after them. Four images travel with a job.
  • A look needs images before shots (0.14). A look defined for a scene with no images yet holds the shots of that scene: they say Needs: Ana · Winter coat look with Open in Assets, since a look is made on its sheet. A character with no looks at all is covered by its identity images.
  • Extras (0.14). A group marked extra (DOCKERS, TWO MOVERS) needs no look sheet. When it is tagged in a scene with two or more shots, the Shot List offers Extras reference · Dockers · scene N → Make it: one image of the group in that place and state, sent with every shot of the scene. It is kept on the group's sheet per scene (sceneReferences).
  • Wardrobe, clothes only. Each look has a wardrobe tile that generates the outfit alone on a neutral mannequin or flat lay, following the project palette.

Locations

  • One place, several states (0.13). A location is one tag; day, night, rain or a flashback are its states, read from the scene headings (EXT. DOCK - NIGHT is LOC_DOCK in the state Night). The loved plate is the base plate and covers the state of the location's first scene. For every other state the script needs, the sheet shows an empty slot ("Night · the script needs this state"); it drafts that plate from the loved plate with the same prompt as Time of day, weather or season, so the place and camera stay and only the light changes. A plate made this way remembers its state, and shots in that state send it. States are required before shots (0.14): until the plate exists, the shots in that state cannot be generated; the Shot List, Storyboard and Dailies say Needs: Dock · Night plate and offer Create it, which makes the same plate from the loved base plate in one click, cost shown first. Nothing stands in for a missing state.
  • Reverse angle. Since 0.20 the reverse is part of the location's set pack (below): made from the loved plate with its role, and sent to the frames that face it. A reverse made with the old tile before 0.20 counts as the pack's reverse.

Elements

  • Every state has a scene range ("Scenes, e.g. 1-4, 9"). Pick a scene at the top of the sheet and the state active there is outlined and labeled "Active · scene N". States follow story time: a flashback uses the earlier state.
  • A state needs its image before shots (0.14). A shot in a scene whose active state has no image cannot be generated; the shot stages say Needs: Lantern · Out and Create it drafts the state from the element's image in one click, cost shown first.

References per asset

  • Until 0.56, every sheet except References had "References for this asset": project images and uploads (up to twelve), sent with every generation of that asset after its identity images. 0.56 took the box away and stopped sending them; + reference keeps photos with each picture instead (above).
  • Describe people and animals on their sheets, not in the director's note. The note travels with every still and take, so a sentence like "Mungo, an old gray lurcher" in the note puts the dog into scenes he is not in; a description on Mungo's sheet reaches only the scenes that tag him (learned on a test film).

Model drafts

  • Available on every category, including Products, Talent and Brand. Questions come first (saved to the director's note), then one editable prompt per sheet without an image, with the cost quoted on the card. Nothing is generated without your click.

Also called (0.16, TAR-92)

  • A character, talent or element sheet carries the other names the script uses for it: nicknames, role names, a surname. "Assign to" on the Story page and the Breakdown's alias suggestions write them here; the line is editable on the sheet too (comma-separated). Every alias tags the same sheet wherever it appears.

Delete and rename

  • Delete removes the sheet. Media files stay in the project (Uploads). "Delete and untag every scene" also writes a removed tag for each scene so the next lock does not recreate the sheet. Since 0.59 it is on the desk too, and its window counts what goes with it (see Assets in 0.59).
  • Rename replaces every occurrence in the working script, keeping each occurrence's case; scene tags follow. A locked draft keeps its text.

0.17: Voice and Temperament, Assign to, nothing gray without a reason

  • A character sheet's Voice is a description in words ("a low, dry baritone, unhurried"), sent with every take where the character speaks: the video model speaks the line in that voice. Non-speaking marks a part without lines. Temperament (the old Personality field) is sent with every take where the character is on screen or speaks, and the chat reads it. Talent sheets on a commercial keep the voice picker.
  • xAI voice (0.23, addendum §30): under Voice, the preset voice the character speaks in on Grok Imagine Video 1.5 · xAI direct, chosen once and the same in every shot. Dailies' Voices pop-up sets the same field.
  • Assign to on a character sheet makes another character's name a name of this person: one tag, one sheet, its scenes and shots folded in.
  • A plate slot that needs a loved plate (a state, a variation, the reverse angle) and a product turnaround without a packshot no longer gray out: a click says what is ready, what is missing, and offers the fix in place (love the first plate, make the base plate, upload the packshot).

What changed in 0.19 (round 7): the looks as the arc, wardrobe elements, plates without headings

  • The looks are the arc, in pictures. A character sheet shows every look side by side in story order, without opening a card: the Base look first (the identity images, for the scenes before any change), then each look in the order of its first scene. Each look shows its images, its clothes-only image and the wardrobe elements it wears, and is labeled with the scenes it covers: the scenes the character is in where stills get that look (the same rule the Shot List uses), or the look's own range when the character is not in those scenes. The scene picker at the top outlines the look that scene gets. Click a look to open its card below and edit it. The Wardrobe · Default, clothes only section shows the clothes-only images and the wardrobe elements the sheet has.
  • A look can wear wardrobe elements. On a look's card, Add a wardrobe element… lists the elements of type Wardrobe (the ones the Breakdown says this person wears come first). A linked element shows its image in the look. The element's image is shared: the same jacket is the same jacket in every shot. When a key frame's character is in that look, the still is sent the element's image too ("Work jacket · element · worn by Ana"), and so is the take; it needs no tag in the scene. The look's own images and its clothes-only image are made with the element's image attached. The element's sheet says which looks wear it.
  • One garment, one link. When two elements are one garment ("Work jacket" and "Jacket"), linking keeps one, the fuller name. Merging the two (Merge into…) leaves every look wearing the one kept. Deleting an element takes it off every look.
  • Four references, and what does not fit is said. A still takes four reference images, ranked by what its frame shows (0.19, TAR-192): the people first, in their look at that moment, then the things the frame names, then what the people wear, then the scene's set reference (the place's plate until the master has a loved still), then the rest. A key frame made from the one before it has three left. When the frame shows more than fits, Check shot list names what is left out ("… the still's 4 references are full, so the Work jacket's image is not sent"), and a worn element with no image yet is listed with who wears it.
  • A look or a state can begin inside a scene (TAR-192). On a look's card, Begins says where the change starts: at the start of its first scene (as before), at a beat of that scene, or at a key frame of one of its shots (a coat put on in the middle of a scene). Stills and takes of that scene follow it from there; the frames before it keep the look the scene starts with, and the Arcs strip says "Begins in scene 3 from beat 5". An element's state has the same menu (a key set down mid-scene). A look with no images yet holds only the shots whose frames are at or after its start.
  • No heading in the picture. A plate, a still and an extras reference are sent the place as a description: the location sheet's name and description, inside or outside, and the time of day as light ("Hardware Store, an interior, at night"). The scene heading's text (INT., EXT., CONTINUOUS, the slugline) is never sent, since image models print it as a caption. Every plate ends on the no-text rule. The still prompt is still-prompt.md v4.
  • Featured extras. A person promoted to a featured extra (in Dailies) shows Featured extra on their card and sheet. They get their own reference images and looks like a character, so they are the same person in every shot, and are sent their own image, never their group's. They have no lines.
  • Empty fields say what goes there. The character sheet no longer shows examples that read like data. Also called says "Other names the script uses for them", Age "Age as seen on screen", Hair "Hair in this look", Temperament "How they behave, and under pressure", Voice "How the voice sounds". A look with no wardrobe of its own shows the default wardrobe as a drafted value, marked "drafted from the default wardrobe": its images are made in it until you change it.

What changed in 0.20 (round 8 §2): the prompts name what the references show, and states come from Assets

  • Name, don't describe. When a still or a take is sent a person's, a thing's or a place's own image, the prompt names it with @ and the name its reference carries ("@Ana", "@Long coat"), and one sentence tells the model that each @name is the attached image of that name. The prompt gives only what they do: the action, the expression, the posture, and how they handle what they wear and what is around them. How they look comes from the image.
  • What is left out. In the action, the staging, the focus, the cues, the moment, the mood, the look line and a take's timeline, a sentence about a referenced person or thing loses the words that only repeat its sheet: the description, the wardrobe, and the look's hair, wardrobe and age ("a tall woman in her forties", "cropped gray hair", "with brass buttons"). A line's words and a speaker's cue are never changed. When the place's plate or the scene's set reference goes, The place: says its name, inside or out and the light, without the location sheet's description.
  • No image, no @. A person, place or thing in the frame whose image is not attached (none made yet, or past the four references) keeps its name and its description as written.
  • A state is an Asset, not a sentence. A state change the Breakdown finds and you accept (a coat comes off, a wound appears, an animal alive in one scene is stuffed in another) becomes a state on the element's sheet, or a look on the person's, with where it begins. Accepted before the sheet exists, it waits on the tag and Lock puts it on the new sheet. A place's state from the headings or the action is a plate slot, as before.
  • Each state says when it needs its image. Assets lists the looks, states and place states that have no image yet ("Net · Torn", "Ana · Soaked look"), each card counts them, and each slot says "needs its image". A frame in that state is sent that image once it exists. Describe a difference in the action only when it is not a state.
  • The prompts are still-prompt.md v6 and video-prompt.md v2.2. The still still sends the scene's mood and the direction of the moment it shows; the Info panel shows both lines.

What changed in 0.22: age looks, states, and where a look ends

  • An age look is the same person at another age. A look with an age ("twenty years younger", "8", "late sixties"), or one named for one ("Young", "Age 8"), drops the sheet's age words ("in her mid-forties", "a 45-year-old", "(40s)", "elderly") and asks for the same person at that age: who they are is kept (the bone structure, the eyes, the nose and mouth, the skin tone), and the age shows in the skin, the hair and the build. It no longer asks to keep the face identical. A look with its own hair drops the sheet's words about hair. A look of clothes keeps the face identical, as before.
  • A state keeps the thing it is. An element's state image is drafted from the element's own description, then the state's ("Brass compass: a pocket compass in a dented brass case. In its "Cracked" state: the glass split across the face."), on the sheet and from a shot's Create it.
  • A look set for some scenes ends with them. A look's scenes are where it holds: a look for scene 3 (a remembered scene, a dream) no longer runs into scene 4, so the next scene's stills get the person's own face again and the arc shows scene 3 only. To keep a change from a scene on (a wound, a haircut), write its scenes open: 3- (or 3+, 3 on, from 3). A look with no scenes, only where it begins, runs until the next look. A scene whose state names the look (the heading's FLASHBACK, a state you set) still gets it. An element's state still runs until the next state.
  • What a container holds is part of its state (addendum §22). An element's sheet has Holds: what it holds before anything changes it ("three spools of red thread and a thimble"). Lock drafts it from the script's action where the element first appears ("the tin holds…", "inside the tin: …", "a key lies in the drawer", "the jar is empty") when the sheet says nothing; your words are never replaced. Each state has its own Holds in this state ("nothing" when empty); a state named or described as empty, spilled or tipped out holds nothing, and a state that does not say keeps what it held. Taking things out, spilling or filling is a new state, and its cause plays on screen. The state's image is drafted with what it holds. A cleared field says nothing (a state then keeps what the sheet holds); write "nothing" for empty. Holds saved by the agent path or an import can also be a list with counts ("three spools of thread and a thimble" is shown that way), and Check the stills compares each frame against the same contents.

What changed in 0.20 (round 8): the set pack and the floor plan

  • A location has a set pack, so a reverse stays in the same room. One plate shows one direction, so a frame that looks the other way used to make the image model invent the other side of the room: the door, the window and the fixtures moved between angles. Under the plates, Set pack shows the master (the loved plate) and the same room turned: the reverse (the camera turned 180 degrees) always, and the left side and right side (turned 90 degrees) when a frame of the location's scenes faces them. Each tile says which frames face it.
  • Make the set pack. The button shows the cost first: one image quote per plate, summed ("about N credits (up to M reserved)"). One click queues one still job per plate, each made with the master plate as its reference and a prompt that turns the same room; it reserves one hold per plate and nothing twice: a second click while they are being queued, or a plate already being made, is refused before anything is reserved. A single empty tile makes that plate alone. A pack plate lands with its role ("Reverse · south") and the plate it was made from; loving one makes it that role's plate, never the location's plate. A new master needs its own pack.
  • The floor plan. Below the pack: which way the master faces (north unless you say), and the landmarks of the place (the door, the windows, the counter, a sign), each on its side (north, east, south, west or the center). Draft from the script finds them in the script's action and the shot list's descriptions, staging and key frames, with the side a compass word next to them gives; the ones the words give no side are listed to place in one click. The plate prompts say where each landmark stands in that view ("the door is straight ahead, on the far side; the window is on the right; the shelves are behind the camera, out of view"). The notes travel with every pack plate.
  • Each frame gets the plate its camera faces. Tarkovsky Director reads the direction from the key frame's own words first, then its shot's staging: a compass direction ("the camera faces south", "Wide, facing north"), a landmark ("toward the door" is the door's side, "the window behind her" the window's, "camera at the window" looks away from it), a person told against the camera ("faces the door, her back to camera"), or "reverse". That frame's still is sent the pack's plate for that side, named as the reverse or the side; when the scene's set reference (the master's loved still) looks the other way, the pack's plate wins for the place and the master's still goes after it as the dressing reference. A take is sent the side its first frame faces. A frame whose words say nothing gets the master, as before.
  • Check shot list names the gap. A key frame that faces a side the pack has no plate for is listed ("Faces the door (south), but Pharmacy's set pack has no reverse plate yet …"), with the place's sheet to open.
  • Later: a 3D or 360° location.

What changed in 0.72: Change this picture

  • Change this picture (0.72). The pencil at the top right of a sheet's picture opens one editor: draw on the picture with Pen, Circle, Arrow or Word (drag any mark to move it), and say what to change. Make the change shows its price first. The new version goes in Alternate versions, beside the picture; the picture you changed stays as it is, and nothing uses the new one until you love it. Its caption says what it was changed from and the words you gave. On a person's or a thing's sheet, A new look makes the new version a look of its own, for the scenes you name. Ask or direct offers the same change when a picture is open and your words ask for one.

QUESTIONS · CHARACTERS AND PLACES

Questions, answered from the guide.

What is a look?

A look is hair, wardrobe, age and a scene range ("1-4, 9"). Add one when a character changes across the story.

What should a character's description say?

In every scene is the Default. A description holds who they are, as seen: age, build, face, hair, how they move, and what the script says they usually wear. Never where they are, what they're doing, the light, anything that happens within one scene (flour on her hands goes in that shot's words) or their voice.

What does the heart on an image mean?

Hearts and likes, everywhere on the page. One heart per look and per angle: that is the image the look's @tag pulls for that angle. Heart a new image and the old one becomes a liked image in Alternate versions; the new one takes its place in the look, the looks bar and the card, and in what every still and take is sent. An alternate in the viewer is hearted for the angle set in Angle. Like marks a keeper, and belongs to the image wherever it shows.

Why does Make say it's waiting for the floor plan?

Plates and stills wait for the OK. Until the plan is OK'd, every Make for those places says Waiting for the floor plan · Open it; Open it opens the plan here, from any page.